Seal It Roof Seal Liquid Roof Coating Bitumen Bleed Blocker Primer 2.5L BDOCRSP2

Bond-it Seal It One Coat Roof Seal Waterproof Liquid Roof Coating Bitumen Bleed Blocker and Primer 2.5 litre

MPN BDOCRSP2

Barcode 5056437401151

Roof Seal Bleed Blocker part of the Award Winning Seal It Roof Seal waterproof liquid roof coating compound system a one-part solvent-free primer for preparation of bitumen surfaces blocks colour bleeding from the bitumen surface or the existing roof, prevents discolouration of the One Coat Roof Seal Liquid roof coating.

Week areas of the and joints can be reinforced with a spunbond polyester mat such as the roof seal reinforcing mat where required, this system gives the ultimate in roof coatings.

Bleed Blocker Primer enhances the bond strength of Seal It Liquid Membrane and Easiseal Pro and other roof coatings to bitumen based, asphalt and felt substrates.

Quick and easy to use roof seal bleed blocker blocks surface staining from bitumen coatings.

Temperature during application of primer must be above + 5 degree C, the primer is coloured light blue to identify treated areas.

Stir BLEED BLOCKER Primer before use to ensure all pigment and polymer is fully dispersed then apply a single coat of SEAL IT BLEED BLOCKER to the surface with a brush or roller.

Follow coverage rate to ensure minimum thickness is achieved and leave to fully cure, normally overnight, in cold weather it may require 48 hours to fully cure.

The primer will dry to a light blue film if a second coat is required, this should only be applied after first coat has fully cured.

It is essential that bituminous materials are completely covered with SEAL IT BLEED BLOCKER prior to application of SEAL IT LIQUID MEMBRANE coating.

Particular care must be given to rough surfaces such as bitumen felt, where any gaps in primer coverage can lead to product failure.

It is essential that any bitumen based surfaces are covered with at least 2 coats of primer

Joints and gaps can be first sealed using roof seal crack and edging sealer 295ml which is used in a standard sealant gun and week areas can be reinforced with Seal It Reinforcing Mat this can also be used across the entire roof if required this will product a really robust roof, offering twice the strength once incorporated.

Application Kits Available 9 inch Single Arm Application Kit or 12 inch Double Arm Application Kit

Approximate Coverage

1 litre of SEAL IT BLEED BLOCKER is sufficient to cover approximately 3 meter square 1 coat or 1.5 meter square if applying 2 coats.

Roof Seal Liquid Roof System Demonstration How To Video

(Please note that tins will get dented in transit and this is not a reason for return please do not purchase tined products if this is an issue for yourself.)