Toupret Exterior Quick Fill One Coat 1hr Ready Mixed 1 litre TTTLX01GB

Toupret Exterior Quick Fill One Coat 1hr Ready Mixed 1 Litre

MPN: TTTLX01GB

Barcode: 3178310018910

Size: 1L

Colour: Light Grey (when dry)

Overview:

Toupret Exterior Quick Fill is a ready-mixed, lightweight filler built for one coat exterior repairs. It sets without shrinkage and accepts paint after just 1 hour. Rich in resin for added strength, it bonds firmly to a wide range of exterior substrates without the need for a primer or sealer.

The paste formula is ready to use straight from the tub - no mixing required. It stays workable for as long as needed, making it easy to fill cracks, gaps, and surface damage on exterior walls.

Once dry, it can be overcoated with all types of water-based masonry or mineral paints, as well as waterproofing coatings. If using polyurethane or solvent-based epoxy finishes, first apply a water-based exterior primer coat.

Key Features and Benefits

• Ready to paint in 1 hour: Speeds up work on site by cutting down waiting time between filling and painting.
• No shrinkage or slump: Stays put after application, meaning no touch-ups or second coats are needed to compensate for movement.
• Rich in resin: Delivers a strong bond to the substrate for a long-lasting repair.
• No depth limitation: Fills repairs of any thickness in a single application pass.
• No primer or sealer needed: Can go straight onto most exterior substrates without preparation primers.
• Ready to use: Supplied pre-mixed at the correct consistency - open and apply immediately.
• Lightweight formula: Less fatigue during application, particularly on vertical surfaces.
• Broad overcoat compatibility: Works under all types of water-based masonry or mineral paints and waterproofing coatings.
• Wide substrate range: Bonds to gypsum plaster, cement, concrete, breeze blocks, bricks, stones, cellular concrete, and old painted surfaces.
• Conforms to BS EN 16566:2014: Tested and classified under the British and European standard for interior and exterior fillers.
• 12-month product guarantee: When stored correctly in original, sealed packaging.

Typical Applications

• Crack repair: Filling hairline to medium cracks on exterior rendered or masonry walls before repainting.
• Gap filling: Plugging gaps around window frames, door surrounds, or between masonry joints on exterior elevations.
• Surface damage: Repairing chips, holes, and blow-outs in cement render, concrete, or breeze block walls.
• Pre-paint preparation: Levelling minor surface irregularities on exterior walls ahead of a fresh paint or coating system.
• Brick and stone patching: Filling localised damage to brick, stone, or cellular concrete facades.
• Remedial repairs: Addressing surface defects on previously painted exterior substrates without full overcoating.

How to Use

• Prepare the surface: Remove any loose material, debris, or dust from the area to be filled. The surface must be hard, cohesive, clean, sound, and dry before application.

• Apply the filler: Using a filling knife, putty knife, or trowel, press the filler firmly into the crack or hole. Fill liberally and avoid missing small voids or cavities.

• Level the surface: Draw the blade across the filled area in different directions to leave a smooth, flush finish.

• Allow to dry: Leave for approximately 1 hour under average conditions. Drying time varies depending on coat thickness, substrate absorbency, and ambient temperature and humidity.

• Sand if necessary: Once fully dry, lightly sand the repair if needed and remove all dust before painting.

• Overcoat: Apply all types of water-based masonry or mineral paints. If using polyurethane or solvent-based epoxy finishes, first prime with a water-based exterior paint before topcoating.

Frequently Asked Questions (FAQs)

• How long does Toupret Exterior Quick Fill take to dry before painting?
  Under average conditions, the filler is ready to paint in approximately 1 hour. This can vary depending on coat thickness, ambient temperature, and humidity. Do not apply below 5°C or above 35°C, or at relative humidity above 80%.

• Does Exterior Quick Fill need a primer before applying?
  No primer or sealer is needed on most exterior substrates. However, if you plan to overcoat with polyurethane or solvent-based epoxy paints, apply a water-based exterior primer to the repaired area first.

• Can Toupret Quick Fill be used to fill deep holes?
  Yes. There is no depth limitation with this product, so it can be used for both shallow surface repairs and deeper fills in a single coat.

• What surfaces is Quick Fill Ready Mixed suitable for?
  It bonds to a wide range of painted and unpainted exterior substrates, including gypsum plaster, cement, concrete, cellular concrete, breeze blocks, bricks, stones, and old painted surfaces.

• How should Toupret Exterior Quick Fill Touprelex be stored?
  Store in the original sealed container, away from direct sunlight and frost. The recommended storage temperature is between 0°C and 30°C. Stored correctly, the product is guaranteed for 12 months from the date of purchase.

Summary

Toupret Exterior Quick Fill One Coat is a ready mixed, one coat exterior filler that sets without shrinkage and can be painted over in as little as 1 hour. Its resin-rich, lightweight formula bonds firmly to a broad range of exterior substrates - from cement and concrete to brick, stone, and old painted surfaces - making it a sensible option for professional exterior repair and pre-paint preparation work.

"Always read the Toupret Exterior Quick Fill (Touprelex) Ready Mixed Technical Datasheet prior to first use to make sure that you have the correct information and product for your application."