Toupret Exterior Masonry Repair Filler 1.5kg Box TTTHR01.5GB

Toupret Exterior Masonry Repair Filler 1.5kg Box - TTTHR01.5GB

MPN: TTTHR01.5GB

Barcode: 3178310018712

Weight: 1.5kg

Colour: Light grey (when dry)

Overview:

Toupret Exterior Masonry Repair Filler (Touprelith F) is a professional-grade exterior repair filler that works on both dry and damp masonry. It fills to any depth without shrinking and shapes without the need for formwork. Weather-resistant once set, it bonds firmly to rough masonry surfaces, including cement, concrete, breeze blocks, bricks, and stone.

This cement-based powder filler conforms to BS EN 16566:2014 and carries an NFT 36 005 classification of Family IV class 4c. Adhesion is tested at over 0.8 MPa to EN 16 566, and the product achieves a VOC content of less than 0.02%.

The 1.5kg box covers a broad range of repair tasks on exterior masonry. It carries a 6-month guarantee from the date of purchase when stored correctly in its original sealed packaging, away from moisture.

Key Features and Benefits

• Damp or dry application: Bonds to masonry substrates, whether wet or dry, without needing to wait for the surface to dry out first.
• No depth limit: Fills cavities and voids to any thickness in a single application - no layering required.
• Shapeable without formwork: Can be manually shaped and sculpted to match the surrounding surface profile.
• Weather resistant: Once cured, the filler withstands exterior conditions without deteriorating.
• No substrate sealing required: Apply directly to prepared masonry without a primer coat.
• Wide substrate compatibility: Adheres to cement, concrete, breeze blocks, bricks, and stone.
• Strong adhesion: Achieves over 0.8 MPa adhesion to substrate (tested to EN 16 566).
• Low VOC: Contains less than 0.02% VOC content.
• 30-minute working time: Allows time to apply and shape before setting begins.
• 6-month guarantee: Covered for 6 months from purchase when stored in original sealed packaging away from humidity.
• Overcoatable: Compatible with any standard water-based masonry paint or mineral paint after 48-72 hours.
• BS EN 16566:2014 compliant: Meets the standard for fillers used in internal and/or external works.

Typical Applications

• Repairing cracks and holes in cement and concrete exterior walls
• Filling damaged areas in breeze block and brick façades
• Restoring stone surfaces affected by weathering or impact
• Filling large or deep voids in masonry where depth limitation would otherwise be a problem
• Reshaping or rebuilding damaged masonry profiles without formwork
• Repairing exterior surfaces ahead of repainting with water-based or mineral masonry paint
• Patching damp or recently wet masonry surfaces where drying time is not available

How to Use

• Prepare the substrate: Make sure the surface is hard, cohesive, clean, and sound. Remove any loose or crumbling material. Do not apply below 5°C or above 35°C, or at relative humidity above 80%.

• Mix the filler: Add 350ml of water per 1kg of powder (35% mixing rate). Pour the powder into water at room temperature and stir thoroughly until smooth. 1kg of mixed product fills approximately 0.85 litres of volume.

• Apply the filler: Use a filling knife, putty knife, trowel, or blade to apply the mixed filler directly to the prepared surface. There is no depth limit, so fill the repair area fully in one go.

• Shape as required: While the filler is still workable (working time is 30 minutes at 20°C), shape and smooth the repair to match the surrounding surface. No formwork is needed.

• Allow to dry and overcoat: The filler is ready to paint after 48-72 hours on average, depending on coat thickness, substrate, and ambient conditions. Overcoat with any water-based masonry paint or mineral paint. Do not apply polyurethane or epoxy solvent-based paints directly - prime first with a water-based exterior paint.

• Clean tools: Clean tools with water immediately after use. Alternatively, allow residue to dry and rub off tools dry.

Frequently Asked Questions (FAQs)

• Can this filler be applied to wet or damp masonry?
  Yes. This filler is specifically formulated for application to both dry and damp masonry surfaces, so there is no need to wait for the substrate to dry before applying.

• How deep can this filler be applied in one go?
  There is no depth limitation. The filler can be applied to fill any void or cavity in a single application without the need for multiple layers.

• How long does this exterior filler take to dry before painting?
  On average, it is ready to overcoat after 48 to 72 hours. The actual time depends on the coat thickness, the substrate type, and the ambient temperature and humidity.

• What paints can be used over this masonry filler?
  Any standard water-based masonry paint or mineral paint can go on directly. Do not apply polyurethane or epoxy solvent-based paints directly onto the filler - prime first with a water-based exterior paint.

• What safety precautions are needed when using this product?
  Wear protective gloves and safety glasses during application. Use a P2 dust mask when sanding. The product contains cement and can cause skin and eye irritation. Always wash hands thoroughly after handling and refer to the Safety Data Sheet before use.

Summary

Toupret Exterior Masonry Repair Filler (Touprelith F) is a professional exterior repair filler in a 1.5kg box, formulated to fill, shape, and restore rough masonry surfaces with no depth limit and no formwork required. It bonds to damp or dry cement, concrete, breeze blocks, bricks, and stone - and is ready to overcoat in 48-72 hours with any compatible masonry paint.

"Always read the Toupret Exterior Masonry Repair Powder Filler Technical Datasheet prior to first use to make sure that you have the correct information and product for your application."