Toupret Anti-Damp Treatment Moisture Barrier Paint White Int Ext TTHS01GB

Toupret Anti-Damp Treatment Moisture Barrier Paint White Int Ext TTHS01GB

MPN: TTHS01GB

Barcode: 3178310018811

Weight: 1kg

Colour: White (when dry)

Overview:

Toupret Anti-Damp Treatment is a ready-to-use moisture barrier that blocks localised problem damp on interior and exterior walls. It dries to a white, flexible film and seals micro-cracks in the substrate. The water-based formula comes ready from the tin - no mixing required.

Apply the treatment directly onto damp substrates using a brush or roller. A second coat can follow after 8 hours, applied in a cross-coat pattern. After full drying, overcoat with any paint type, wallpaper or Toupret filler within 24 hours.

The treatment performs on cement, bricks, stone and old painted surfaces. Coverage reaches 3m² per kilogram across two coats. Do not apply below 5°C or above 35°C, or at a relative humidity above 80%.

Key Features and Benefits

• Moisture barrier: Blocks localised problem damp on walls and substrates without waiting for surfaces to fully dry first.
• Micro-crack coverage: Seals hairline cracks in the substrate as part of the treatment process.
• Ready to use: Comes pre-mixed straight from the tin, saving preparation time on site.
• Interior and exterior use: Approved for both internal and external applications on a wide range of substrates.
• Flexible film: Dries to a white, flexible coating that accommodates minor substrate movement.
• Application method: Apply with a standard brush or roller for direct coverage.
• Quick recoat time: Second coat applies after just 8 hours average drying time.
• Overcoat-ready in 24 hours: Paint, wallpaper or filler can follow once the treatment has fully dried.
• High compatibility: Overcoat with any paint type or wallpaper, including Toupret fillers.
• Water-based formula: Low VOC content below 15g/L - tools clean up with water after use.
• Wide substrate range: Works on cement, bricks, stone and previously painted surfaces.
• 12-month guarantee: Covered for 12 months from purchase when stored correctly in original sealed packaging.

Typical Applications

• Treating damp patches on interior walls prior to painting or decorating.
• Blocking moisture penetration on exterior cement or brick surfaces.
• Sealing problem damp on stone walls before overcoating.
• Treating old painted surfaces affected by localised moisture ingress.
• Covering micro-cracks on damp substrates before applying paint or filler.
• Preparing basement and cellar walls for subsequent decoration.
• Treating exterior brickwork subject to persistent damp.
• Creating a moisture-resistant base layer before wallpaper application.

How to Use

• Prepare the surface: The surface must be hard, cohesive, clean and sound. Remove loose material and prepare as per current trade practices.

• Check conditions: Do not apply below 5°C or above 35°C, or at a relative humidity above 80%. Avoid direct sunlight, overheated or frozen substrates.

• Apply the first coat: Use a brush or roller to work the treatment across the substrate in a cross-coat pattern. No mixing is needed - the product is ready to use straight from the tin.

• Allow to dry: Wait a minimum of 8 hours before applying a second coat. Drying times vary based on substrate type, coat thickness and ambient conditions.

• Apply a second coat: Work the second coat in the opposite direction to the first for full cross-coat coverage.

• Overcoat: Allow 24 hours after the final coat before painting, wallpapering or applying filler. Clean tools immediately after use with water.

Frequently Asked Questions (FAQs)

• What substrates can Anti-Damp Treatment be applied to?
  The treatment is designed for damp but not dripping substrates. Suitable surfaces include cement, bricks, stone and old painted walls - for both interior and exterior use.

• Does the wall need to be dry before applying Anti-Damp Treatment?
  No. The product is specifically formulated for damp substrates. The surface should be damp but not saturated or actively dripping water.

• How long after application can you paint over Anti-Damp Treatment?
  Overcoating with paint, wallpaper or filler is possible after 24 hours on average. This timeframe depends on the substrate, coat thickness and ambient temperature and humidity.

• How much coverage does one 1kg tin provide?
  A 1kg tin covers approximately 3m² when applied in two coats. Coverage may vary depending on substrate porosity and application thickness.

• What temperature is needed to apply Anti-Damp Treatment?
  Apply in temperatures between 5°C and 35°C. Avoid application in direct sunlight or on frozen or overheated surfaces. Relative humidity must not exceed 80% during application.

Summary

Toupret Anti-Damp Treatment Moisture Barrier Paint (White) is a water-based, ready-to-use moisture barrier for tackling localised damp on interior and exterior walls. It blocks problem moisture, covers micro-cracks and dries to a white flexible film, compatible with all paint types and wallpapers. Available in a 1kg tin with a 12-month guarantee from date of purchase.

"Always read the Toupret Anti-Damp Treatment Moisture Barrier Paint (Humi-Stop) Int Ext Technical Datasheet prior to first use to make sure that you have the correct information and product for your application."