Blue Spot Tools Ironmongery 152mm Black Powder Coated Tower Bolt 78002

Blue Spot Tools Ironmongery 152mm Black Powder Coated Tower Bolt

MPN: 78002

Barcode: 5028734780024

Size: 152mm

Weight: 0.23kg

Colour: Black

Overview:

This 152mm carbon steel tower bolt from Blue Spot Tools carries a black powder coat finish that resists corrosion on permanent outdoor installations. At 152mm, it offers a longer bolt throw than shorter alternatives, making it well suited to field gates, double garden gates, and larger shed doors.

All fixings needed for installation are included in the pack. No additional hardware needs to be sourced before fitting.

Key Features and Benefits

• Carbon Steel Construction: Maintains its shape under regular use without bending or deforming.
• Black Powder Coat Finish: Provides a protective layer against rust and corrosion on outdoor surfaces.
• 152mm Bolt Length: Gives a longer throw suited to larger gates and door frames.
• All Fixings Supplied: Every screw and fitting required for installation is included.
• 5 Year Guarantee: Backed by a 5 year manufacturer's guarantee.

Specs & Attributes

• Material: Carbon steel
• Finish: Black powder coated
• Bolt Size: 152mm
• Weight: 0.23kg

Typical Applications

• Double garden gate fastenings
• Field gate and driveway gate security
• Large shed and outbuilding door closures
• Workshop and garage side door fastenings
• Summerhouse and garden room doors
• External storage and bin store enclosures

How to Use

• Mark the fixing positions: Hold the bolt plate against the door at your chosen height and mark each screw hole with a pencil.

• Drill pilot holes: Pre-drill at each marked point to prevent the timber splitting when screwing in.

• Attach the bolt plate: Fix the plate to the door using the supplied screws.

• Position the staple keep: With the bolt extended, align the keep against the door frame, mark its fixing holes, then screw it into place.

• Test and adjust: Slide the bolt back and forth to confirm free movement. Reposition the keep slightly if the bolt catches or resists before fully tightening.

Frequently Asked Questions (FAQs)

• How long should a tower bolt be for a double gate?
  For most standard double gates, a bolt of 150mm or longer provides good engagement with the keep. Heavier or taller gate panels may benefit from two bolts fitted top and bottom for added stability.

• Can tower bolts be fitted to the inside of a gate?
  Yes. Tower bolts are commonly fitted to the inside face of a gate so the bolt is not accessible from the street side. This is the standard practice for most residential garden gate installations.

• What is the difference between a straight tower bolt and a necked tower bolt?
  A straight tower bolt sits flush against the surface it is fitted to. A necked bolt has an offset in the barrel that allows it to clear a lip or stepped edge - used where the door and frame are not on the same plane.

• How do I stop a powder coated bolt from fading outdoors?
  Powder coat is applied as a hard, cured finish and does not need painting or sealing. To maintain it, wipe down with a damp cloth occasionally and avoid abrasive cleaners that could scratch through to the steel beneath.

• Can I use a tower bolt to secure a gate against wind movement?
  A tower bolt fastens a gate in the closed position and holds it against the frame. For gates that blow open in high winds, fitting both a top and bottom bolt - or a heavy-duty hasp - gives better wind resistance than a single bolt alone.

Summary

The Blue Spot Tools 152mm black powder coated tower bolt is a carbon steel sliding fastening for wooden garden gates, shed doors, and external access points. The 152mm bolt length suits double gates and larger door frames where a shorter bolt would not fully engage. All fixings are included and a 5 year manufacturer's guarantee is provided.