Blue Spot Tools Ironmongery 200mm Black Powder Coated Tower Bolt 78003

Blue Spot Tools Ironmongery 200mm Black Powder Coated Tower Bolt

MPN: 78003

Barcode: 5028734780031

Size: 200mm

Weight: 0.35kg

Colour: Black

Overview:

The Blue Spot Tools 200mm tower bolt is manufactured from carbon steel with a black powder coat finish, built for permanent outdoor use on wooden gates, fences, and external doors. At 200mm, the bolt provides a long, positive throw - well suited to heavy wooden gate panels and wider door openings where shorter bolts would not reach.

The pack includes all fixings required for installation, so the bolt can go straight to fitting without additional trips to source hardware.

Key Features and Benefits

• Carbon Steel Build: Stands up to outdoor use without bending or losing structural integrity.
• Black Powder Coat Finish: A cured surface coating that protects against rust on exposed exterior metalwork.
• 200mm Bolt Length: A long throw that engages deeply into the keep - suited to heavy gate panels and wide frames.
• All Fixings Included: Installation hardware is supplied in the pack.
• 5 Year Guarantee: Covered by a 5 year manufacturer's guarantee.

Specs & Attributes

• Material: Carbon steel
• Finish: Black powder coated
• Bolt Size: 200mm
• Weight: 0.35kg

Typical Applications

• Heavy wooden garden gate security
• Wide driveway and field gate fastenings
• Workshop and garage side door closures
• Large outbuilding and barn-style door bolts
• Perimeter fence access gate security
• External double door fastenings

How to Use

• Mark the fixing positions: Hold the bolt plate at your chosen height on the door and mark each screw hole clearly with a pencil.

• Drill pilot holes: Pre-drill at each mark to avoid splitting the timber when driving screws in.

• Fix the bolt plate: Screw the plate to the door using the supplied fixings.

• Align and fix the staple keep: Extend the bolt fully against the door frame, mark the keep position, then fix it in place so the bolt slides into it cleanly.

• Check the action: Test the bolt moves freely throughout its full throw. Make any minor adjustments to the keep before tightening the screws fully.

Frequently Asked Questions (FAQs)

• What size tower bolt should I use for a heavy wooden gate?
  For heavy or wide gate panels, a bolt of 200mm or more gives a deeper engagement with the keep and holds the gate more firmly in the closed position. Fitting two bolts - one high and one low - is the standard approach for heavy double gates.

• Is a 200mm tower bolt suitable for a driveway gate?
  Yes. A 200mm bolt provides enough throw for most driveway gate frames. Where the gate is particularly wide or heavy, using two bolts fitted at different heights gives a more secure closure.

• Can tower bolts be used on pressure-treated timber?
  Yes, but pre-drilling is especially important on treated timber as it can be harder and more prone to splitting. Use the supplied fixings or replace with stainless steel screws if the timber treatment is particularly aggressive.

• How should I position a tower bolt on a tall garden gate?
  For a single gate, a bolt positioned roughly one third from the top of the gate works well. For taller or heavier gates, fitting a second bolt near the bottom gives a more balanced closure that reduces the risk of the gate warping or bowing over time.

• Will carbon steel rust if the powder coat gets scratched?
  Scratched powder coat exposes the steel beneath to moisture, which can lead to surface rust. Touch up any deep scratches with a suitable metal paint to prevent this. Routine cleaning and avoiding abrasive tools on the finish will help it last.

Summary

The Blue Spot Tools 200mm black powder coated tower bolt provides a long bolt throw for heavy wooden gates and wide external door frames. Carbon steel construction and a powder coat finish make it suited to permanent outdoor installations. A 5 year manufacturer's guarantee is included, along with all fixings needed for fitting.