Blue Spot Tools Ironmongery 150mm Black Powder Coated Necked Tower Bolt 78060

Blue Spot Tools Ironmongery 150mm Black Powder Coated Necked Tower Bolt

MPN: 78060

Barcode: 5028734780604

Size: 150mm

Weight: 0.24kg

Colour: Black

Overview:

The Blue Spot Tools 150mm necked tower bolt is built from carbon steel with a black powder-coated finish. The coating forms a protective outer layer against moisture, helping the bolt hold up in outdoor conditions.

The cranked neck design bridges the gap between a door and a recessed frame. This makes it the right choice for garden gates, wooden fences, and shed doors where the door sits set back from the surrounding frame.

All necessary fittings are included with the bolt. It carries a 5-year Blue Spot Tools guarantee.

Key Features and Benefits

• Carbon Steel Body: Provides the strength needed to secure outdoor gates and doors under regular use.
• Necked (Cranked) Design: Bridges recessed door frames where a straight bolt would not reach.
• Horizontal or Vertical Mounting: Can be installed in either orientation to suit the door or gate configuration.
• Black Powder Coat: Protects the steel from rust and corrosion in outdoor environments.
• All Fittings Included: No additional hardware needed - everything required for installation is supplied.
• 5 Year Guarantee: Backed by Blue Spot Tools for 5 years from the date of purchase.

Specs & Attributes

• Size: 150mm
• Weight: 0.24kg
• Material: Carbon steel
• Finish: Black powder-coated
• Colour: Black
• Use: External

Typical Applications

• Wooden garden gates
• Shed doors
• Fence gates
• Outbuilding doors
• Double doors with recessed frames
• Garage side doors

How to Use

• Position the Base Plate: Hold the base plate against the door at the intended mounting point and mark the fixing holes.

• Drill Pilot Holes: Drill pilot holes at the marked positions to avoid splitting the wood.

• Fix the Base Plate: Screw the base plate firmly to the door surface using the supplied fittings.

• Attach the Receiver: Fix the flat plate receiver to the door frame, aligned with the bolt path.

• Test the Bolt: Slide the bolt into the receiver to confirm it moves freely and sits flush when closed.

Frequently Asked Questions (FAQs)

• What is a necked tower bolt?
  A necked tower bolt - also called a cranked bolt - has an offset neck section. This allows it to bolt a door to a frame that sits further back or is thicker than the door itself.

• What is the difference between a necked tower bolt and a standard tower bolt?
  A standard tower bolt sits flat against the door and suits flush-fitting doors. A necked bolt has a cranked section, letting it reach across a recessed frame where the door sits back from the frame face.

• Can a necked tower bolt be fitted horizontally?
  Yes. A necked tower bolt can be mounted either horizontally or vertically, depending on your door or gate setup.

• Is a powder-coated finish suitable for outdoor use?
  Yes. A powder coat forms a hard, bonded layer over the steel. This protects against moisture and rust, making it well-suited for permanently installed outdoor hardware.

• What type of doors and gates is a necked tower bolt used on?
  Necked tower bolts suit garden gates, shed doors, double doors, and any door or gate where the door sits in a recessed frame. They are a common choice for wooden outdoor installations.

Summary

The Blue Spot Tools 150mm black powder-coated necked tower bolt is a carbon steel sliding bolt built for permanent outdoor installation. Its cranked design suits recessed door frames, making it a practical choice for garden gates, fence panels, and shed doors. All fittings are included, and the bolt is backed by a 5-year Blue Spot Tools guarantee.