Joint It Algae Remover 5 Litre Premium Concentrate

Joint-It Algae Remover 5 Litre Premium Concentrate

MPN JIAR5

Barcode 5391535770236

5-Litre Trade Size

Joint-It Algae Remover is a premium natural stone cleaner that can also be used on many masonry and concrete and wood surfaces such as decking Joint it Algae moss and mould works in days and lasts for months.

This natural stone and concrete cleaner penetrates deep into the stone to kill off algae and lichen that build up over the winter months and will leave your surface patio, and the driveway will even work on the tarmac.

Joint It Algae Remover is formulated for both domestic and professional use against algae fungi and mould, suitable for application on internal and external surfaces such as porcelain, natural stone, concrete, plaster, render and timber surfaces such as fences and garden decking and furniture.

Joint-it Algae Remover is simple and easy to use just spray onto the surface to apply and leave it to do its work no scrubbing or pressure washing required it can be used on all surfaces, including natural stone and concrete paving, walls, paths, roofs, decking, tarmac, and block paving with this powerful high-performance product in the home or garden and it's simply spray-and-go.

All you have to do is spray Joint-It Algae remover on your patio, driveway or tarmac and leave it to do the work there's no scrubbing needed.

Make those outside and inside spaces come back to life.

Specification and Main Points:

• 5-Litre Trade Size
• Concentrated formular 5 litres makes 35 litres
• Easy to apply by spray roller or brush
• Safe on natural stone
  
• Suitable to use on driveways, patios, tarmac, natural stone wood, plastic and concrete paving, etc
• Powerful and effective
• Fast acting with long-lasting results
• Controls and treats algae moss mould and lichen
• Simple and quick apply on a dry day and walk away
• Use on all hard outdoor surfaces 
• Works in Days Lasts for months

How To Use:

1. Brush away leaves and debris and any heavy growth
2. Shake well before use
3. Always test a small hidden portion prior to treating a surface before full application
4. The product is concentrated and need to be mixed with water 1 part concentrate to 7 parts water
5. Apply by spray. If the wind is up, apply by brush or roller
   
6. Do not apply if rain is expected within 4 hours.
7. Use a low-powered pressure spray such as a pump sprayer, lance or trigger spray, roller or brush and apply so clean to the point of saturation, i.e. flooded.
8. Leave the product to work don not wash off
9. There should be visible improvement within 24 to 48 hours.

For severe cases of algae use a stiff brush to work the product in and carry out a second application after 72 hours.

Coverage depends on a lot. This depends on the porosity, type and texture of the surface.

As with all cleaners, we highly recommend testing a small hidden surface area to determine the required quantity and suitability. The more porous the stone, the more product you will need.

Approximate coverage is 12 meters square to 1 litre of product

Precautions

Do not apply if rain is expected within 4 hours

Do not apply close to shrubs other plants and grass.

Do not apply near ponds or waterways

Keep children and pets away from the area until the surface is dry

Can be applied by spray, brush, or roller a Application Kits Available 9 inch Single Arm Application Kit or 12 inch Double Arm Application Kit

Also Available Joint It Ready to Use 1 Litre Algae Remover Spray