Bond It Drive Alive Oil Stain Remover Patio Driveway 1 Litre BDOSR1

Bond It Drive Alive Oil Stain Remover Patio Driveway 1 Litre

MPN BDOSR1

Barcode 5060021367297

Bond It Oil Stain Remover removes oil and grease stains from car driveways path's patio's, oil stain's from barbeque stains a quick easy solution for spilt oils, removes oil, petrol, diesel, grease and tanning stains from driveways garage floors paths and patios. a ready to use do not dilute oil digester works on concrete, stone, tarmac, most common paving materials and BBQ areas.

Bond it oil stain remover is a non flammable cleaner that's excellent for oil and grease lifting from porous surfaces, such as paviours, slabs, drives, pathways and patios great for removing oil leak stains from cars or grease spots from barbeque areas.

Product Benefits

• Ready to use, no diluting required.
• Easy to use simply pour on stain, allow to dry and brush away.
  
• Water clean up.

Uses

• Removing oil stains from driveways including concrete, stone, tarmac, block paving etc.
• As a general cleaner for paths, patios and driveways.

Preparation:

• Remove any surface debris using a stiff brush large deposits of moss algae should be first treated with Bond It Patio Blaster prior to application of Bond It Oil Stain Remover.

Application

Stain Removal

1. Shake well before use. Pour DRIVE ALIVE OIL STAIN REMOVER on to the oil or grease stain, ensuring the stain is completely covered.
2. Simply leave until totally dry minimum 3 to 4 hours, cold or humid conditions will slow drying times then we would recommend leaving for 24 hours to ensure product has had sufficient time to absorb material effectively.
3. Once dried, the area should be swept with a stiff broom to remove the dried product.
4. Hose down the treated area to ensure all powder residue is completely removed.
5. For oil spills covering a larger area, OIL STAIN REMOVER can be diluted 1 to 1 with water. depending on the size of the area, a brush may be required to spread product.
6. A second application may also be necessary.

If white stains remain on surface, scrub well using hot water.

As with all Treatments always test on a small inconspicuous area first.

Always read technical Data sheet prior to use this can be downloaded from the product download tab in PDF Form.

Coverage depends on surface but is approximately 1 meter square per litre.

All Surface Coatings Treatments and cleaners