Bond It Mould Stop Moss Mildew Remover 25 Litre Fungicidal Wash BDH072

Trade Option 25 Litre Drum

Bond It Mould Stop Fungicidal Wash Moss Mould and Mildew Remover

Barcode 5060021367429

MPN BDH072

Bond It 25 litre trade tub ready to use spray a powerful fast acting fungicidal solution which is effective on most surfaces.

Quickly removes fungus and lichen from floors walls and roofs, removes all types of organic growth, algae, etc. from brick concrete, wood, tarmacadam, painted surfaces, decking, garden furniture, paviours, plastic and glass and can also be used on fabric awnings.

Bond It Mould Stop can be applied internally and externally, it also leaves a residual surface to help prevent further infestation.

Kills mould caused by damp on internal and external floors and walls.

Kills mould growth on roofs prior to coating with bituminous coatings.

Ideal for use at home, in the garden, for caravans and boats, public walk areas, in farm yards, kennels and stables.

Removes algae from patios drives and similar surfaces.

Notes

• 25 Litre.
• Do not dilute ready to use formula.
• For use only as specified as a surface biocide.
• Always read label before use and wear suitable protective equipment.
• Remove all surface debris and growth from the area to be treated.
• No scrubbing or pressure washing required Do not wash off.
• HSE Approved.
  

Bond It Mould stop Approximate Coverage

• Apply by brush or spray in at a rate of 1 litre per 5 to 15 meters Square depending on surface porosity.

Application

• Ideally use when rain is not imminent and use only in well ventilated areas.
• Ensure the surface to be treated is free from loose material, dirt and grease.
• Use bond it mould stop neat, no need for dilution.
• Apply using either a spray, soft broom, paint brush or watering can.
• Apply evenly to the surface to be treated ensuring the liquid thoroughly coats cracks and crevices.
• Leave for a few days to dry to allow product to reach full strength.
• Kills mould and algae within 2-3 days of application and prevents re-growth for many months.
• Stubborn growth areas may require further application.
• Any residue should weather away over a period of time.
• All surfaces differ and it is recommended that this product is tested on a small inconspicuous area to determine suitability before use.

Also Available 

Bond It Mould Stop 1 Litre

Bond It Mould stop 5 Litre