Bond It Drive Alive Clear Coat Block Paving Sealer 4 Litre BDCCBS4

Brand: Bond It
 QR36908 |  In Stock

  • RRP£38.86 Inc. VAT
  • OUR PRICE £16.63

    £19.96   Inc. VAT
  • Product Code: BDCCBS4
  • EAN: 5060021368300
  • MPN: 

Interest free

Bond It Drive Alive Clear Coat Block Paving Sealer

Size 4 Litre


Barcode 5060021368300

Bond It Clear Coat High Build Block Paving Sealer for use only on interlocking block paving on driveways paths and patios.

Bond it clear coat protects the block paving from water penetration, staining and dirt grime build-up.

It will enhance present colour and extend the lifespan of the treated blocks.

Bond it Clear Coat Benefits

  • Protects from water penetration staining and dirt grime build‐up.
  • Advanced Hybrid technology.
  • Ready to use.
  • Excellent abrasion and chemical resistance.
  • Contains fungicide which inhibits organic growth.
  • Solvent‐free and low odour.
  • Facilitates easy cleaning.
  • Improves water and UV resistance.
  • Suitable for heavily trafficked areas.

Application Kits Available 9 inch Single Arm Application Kit or 12 inch Double Arm Application Kit

Areas For Use

Seals and protects, block paving, paths, patios and driveway's.


Remove organic growth lichens etc. that may be present.

For best results pre treat the areas with Bond It PATIO BLASTER refer to data sheet.

Wash all debris away and ensure the surface is dry and free from oil, grease, dust and loose material that may hinder adhesion.


Drive alive clear coat is ready to use, and does not require diluting.

We advise that you test this product on a small inconspicuous area prior to use to check compatibility.

Stir well before use.

Ensure that the blocks are completely dry, then apply a single coat using either a brush, roller or squeegee, ensuring no pooling or ponding occurs.

Allow 3 to 4 hours drying time this may be extended depending on conditions before trafficking the area.

Application temperature must be between +5 degree C and +30 degree C.

Colder humid conditions will slow drying times and may cause blooming.


One 4 Litre container will cover approximately 15 meter square for a single coat depending on surface porosity.

Important Note

Always reed the data sheet prior to application for does and dont's.

It is necessary to seal blocks prior to the application of any pointing or jointing compound.

Some compounds have the capability of staining porous paving materials.

Ensure clear coat has completely cured prior to pointing.

Do not apply clear coat to any uncured wet pointing or to any dry mix cement compound.

If applying to new paviours ensure a sufficient period of weathering as recommended by the paving manufacturer has elapsed in order to avoid efflorescence.

Blocks can be resealed using a single coat of clear coat at 3 to 4 year intervals.

The surface may still be sealed even when the surface tension appears to have reduced

Always apply to a small test area and check a few days later.

Avoid over application ponding and pooling.

Brand Drive Alive
Manufacturer Bond It
Reference Code BDCCBS4
Type Block Paving Sealer
Size 4 Litre
Colour Clear
Name Link
Bond It Drive Alive Clear Coat Block Paving Sealer Safety Data Sheet Download Attachment
Bond It Drive Alive Clear Coat Block Paving Sealer Technical Data Sheet Download Attachment

Related Products