Joint It Dynamic 2 Part Resin Paving Jointing Compound Pointing System 22kg

Joint It Dynamic 2 Part Resin Paving Jointing Pointing Compound System 22kg

3 Colours:

• JID22BUF - BUFF Neutral
• JID22GRE - Grey
• JID22BLA - Black

22kg Buckets:

Joint it Dynamic 2 part resin paving jointing stystem is a paving jointing compound that is easy to apply. It is loved by professional landscapers, builders, and homeowners. This premium pointing compound can be used for joints at least 5mm wide and 20mm deep. Having 5mm or broader joints is best when building a patio from scratch.

The product can be used on joints starting from 5mm wide,  Joint it Dynamic can be swept into the joints of slabs that have been already soaked with water the more water the better. It is compatible with all natural stone and concrete paving products, all you neeed is a hard and soft broom water and a paddle mixer, paddle mixers can either be bought or hired from your local hire shop.

Joint-It Dynamic is a two part resin paving jointing system it represents cutting edge solution for enhancing the longevity and aesthetic appeal of outdoor paved areas it's an excellent solution for all home improvement requirements, garden patio pointing to commercial projects, whether you’re a homeowner looking to revamp your outdoor space or a landscaping professional seeking a reliable jointing solution, this resin based system is engineered to exceed your expectations, in the bucket is a very high grade pointing sand and 2 bottles a resin binder and a hardener.

Joint-It's Dynamic is suitable for Permeable and Non Permeable Bedding systems, this paving jointing compound is water permeable, no more long lasting puddles in your patio, this is also in the news recently because of all the construction and hard surface projects that prevent rain from seeping into the ground forcing water into rivers and out to sea and not where we need it.

It should be performed by someone with some practical experience. Please take a look at the video to see how simple it is to apply the solution for a perfect result,

Joint-It Dynamic is suitable for use with all natural stone and concrete paving slabs including:

• Porcelain
• Sandstone
• Limestone
• Slate
• Concrete Slabs / Paving
• Yorkstone
• Granite
• Louisiana Stone
• Oklahoma Stone
• Quartz
  

The Two Part Resin System Components:

The 2 part resin systems consist of two separate components that, when combined, create a chemical reaction resulting in a strong, flexible, and durable bond. In the context of paving jointing, these two components include:

A Resin Binder Part A

The primary component that provides adhesion and strength to the joint. It’s designed to withstand various environmental factors, including temperature fluctuations.

A Hardener Part B

This component initiates the curing process when mixed with the resin binder. It ensures rapid setting and hardening of the jointing material, so that you can get your patio finished faster.

The Premium Coloured Poining Sand

Available are 3 different sand colours for you to choose from Buff, Grey and Black. The colour of the lid on the bucket indicates the colour of the sand inside. Joint-It have sourced the best quality sand on the market which is colour-matched to ensure consistency and reliability.

Typical Uses:

• For use in big joints encompassing 5mm and up to 20mm deep.
• For all sorts of paving stones, bricks, concrete slabs, Porcelain and natural stone pointing.
• For use on square sided paving, Joint it dynamic is not suitable for V Joint.
• Can be used on porcelain paving if the joints are at least 5mm wide.
• There is no maximum joint width.
• Suitable for high traffic areas.
  

Advantages:

• 22kg buckets
• Joint it Dynamic comes i 3 diferent colours Buff Grey and Black
  
• Weed, Power-washer and Frost Resistant
• Sand and cement pointing techniques are both time-consuming and challenging.
• Sweeping in the jointing compound means it gets the job done faster and better with a more consistent result and stands the test of time.
• Joint is a moisture-resistant, non-leaching adhesive that's great for natural stone. It's also safe for natural stone because it won't stain. However, limestone and honed black granite should be pre-sealed prior to pointing it with Joint-it Simple first.
• The cutting-edge binding technology of the resin in Joint it Dynamic sets this top-of-the-line jointing compound apart from the competition.
• Premium patio grout is simple to use and provides easy jointing. Joints that are both strong and durable, with longer-lasting connections.
• It's simple to operate, with a water brush in and water. Take a look at the video for further information.
• Increased lifespan, greater flexibility and many more advantages over traditional sand and cement without mobility qualities.
• Joint-It Dynamic sets rock hard, unlike other grouts and mortars that might fracture and loosen, allowing weeds to grow.
• It's designed to last for a long Time.
  
• With a bit of work and fantastic results, all you need is a hard or soft broom, water, preferably a hose, and a tub of Joint It Dynamic.
• Apply in wet or dry weather.
• Cement Free.
• Mix in the bucket supplied.
  

How to use Joint it Simple:

• Soak paving with water
• Sweep Joint It Simple into joints
• Soak again and wait for 15 to 45 minutes
• This time, use a soft broom to sweep away any extra product from the slab

Important Top Tips From The Manufacturer:

Joint-It Dynamic can be used on both permeable and non-permeable bases

Joint-It Dynamic is not suitable for V joints.

Joints must be a minimum of 5mm wide and 20mm deep to ensure the product is secure.

We strongly recommend Limestone and Flamed Honed Black Granite are pre-sealed prior to application of Joint-It Dynamic. Flamed, honed or Egyptian stone must be sealed both sides prior to applying Joint-It Dynamic or any other jointing material.

While this product is low maintenance, all patios require some level of maintenance annually, particularly in shaded areas or after the winter. A quick application of Joint-It So Clean keeps your patio looking new and refreshed.

We recommend that you avoid using a power-washer on your paving for a minimum of 30 days after applying Joint-It Dynamic.

Always use lots of water and keep the paving wet through the entire process to avoid staining, should there be some light staining on natural stone this residue should weather-off within a few weeks. Sometimes this can take longer depending on the type of stone used, the more water used the less likely there will be any staining.

Because Porcelain is a smoother stone it doesn’t absorb water to the same degree as other natural stone products. To get the best results when using Joint-It Dynamic with Porcelain, we recommend that you keep both the top of the stone paving and the Joint-It Dynamic product saturated with clean water to make Joint-It Dynamic flow into the Porcelain joints more easily.

Joint it Dynamic can not be stored to be used later once part A and Part B have been mixed with the pointing compound it is begining to cure.