Alpha Chem D3 All Trades Wood Adhesive 1 Litre Cromar X2WA1

Alpha Chem D3 All Trades Internal External Wood Adhesive 1 litre Bottle

Barcode 5036684020947

MPN X2WA1

Cromar Alpha Chem white wood glue dries clear a Medium viscosity, resin based polymer Wood Adhesive which exceeds the water resistance requirements of EN204 D3 Class.

Alpha Chem D3 Wood Adhesive is an easy to use water resistant adhesive that bonds wood together to form a permanent, high strength inseparable and impact resistant joint.

The superior quality formula sets quickly, in just 10 minutes and is perfect for all interior and exterior general woodworking, joinery uses, household and DIY use as well as furniture assembly.

The 1 litre bottle has a nozzle that can be trimmed to the desired size with snap on lid for product preservation when storing.

All Trades D3 Wood Glue Main Benefits

• 1 Litre Bottle for easy application and handling
• D3 Grade water resistant adhesive
• Excellent rate of bond strength development.
  
• Joints may be subject to short term water contact or exposure to high humidity.
  
• Interior and exterior use.
• Quick setting in just 10 minute's
• Dries clear.
  
• Water based.
• Environmentally friendly.
• Easy clean up.
• Suitable for radio frequency cure.
• Perfect for all interior and exterior general woodworking.
• Joinery uses household and DIY use as well as furniture assembly.
• Conforms to EN 204 D3 and BSEN 14256 for creep resistance.
• Applies white, dries clear.
  

Directions

1. Ensure surfaces to be bonded are clean, sound, dry and free from dust, grease or other contaminants.
2. Apply an even, thin film of D3 Wood Adhesive to both surfaces, taking care not to over apply.
3. Clamp surfaces together until fully cured (dries off in 1-2 hours, full cure at 8 hours dependent on temperature.
4. If applying when fitting dowels, the adhesive should be applied to the holes.
5. Remove wet adhesive using a damp cloth. Cured adhesive should be sanded off, this should be done prior to staining the wood.
   

Limitations

Not suitable for water immersion.

Ensure wood doesn’t contain excessive moisture

Do not use at temperature below 10 degrees C.

Drying times are extended at lower temperatures.

Do not use on non-porous or large areas of laminate.

External use protect joints with an impervious paint system once dry.

Read the technical data sheet prior to use this can be downloaded in PDF Form from the download section of this product.

Also Available is Alpha Chem D3 All Trades Wood Adhesive in 5 Litre Trade Size

All Wood Glues and Adhesives