Blue Spot Tools Electralight 1000 Lumen Rechargeable COB LED Work Light 65328

Blue Spot Tools Electralight 1000 Lumen Rechargeable COB LED Work Light 65328

MPN: 65328

Barcode: 5028734653281

Weight: 0.51kg

Overview:

The Blue Spot Tools Electralight delivers up to 1000 lumens through a 10W COB on the front, with high, medium, and low output modes. A 5W LED on the top adds a second light source with its own high and low settings.

The rear USB port lets you charge phones and tablets directly from the built-in 4000mAh Li-ion battery. This doubles the unit up as a power bank on site or off grid. A rear magnet and hanging hook keep both hands free during use. The plastic and aluminium alloy build keeps the overall weight down at just 0.51kg.

Key Features and Benefits

• Dual light sources: A front COB and a top LED give you two independent lighting positions to suit different tasks and angles.
• Three front output modes: High, medium, and low settings on the COB let you match light output to working conditions.
• Two top output modes: High and low on the top LED for directional or secondary lighting when needed.
• Built-in power bank: Charge phones, tablets, and other USB devices directly from the work light on site.
• Hands-free mounting: The rear magnet holds the unit to any ferrous surface, while the hanging hook lets you suspend it overhead.
• Up to 10 hours run time: Extended battery performance reduces the need to stop and recharge mid-task.
• Fast recharging: Gets back to full capacity quickly so downtime between charges stays short.
• Low carrying weight: At 0.51kg, it moves easily between jobs without adding bulk to your kit.

Specs & Attributes

• Lumen output: Up to 1000lm
• Front light: 10W COB - high, medium, and low modes
• Top light: 5W LED - high and low modes
• Battery: 4000mAh Li-ion
• Battery life: Up to 10 hours
• Weight: 0.51kg
• Dimensions (WxDxH): 5.5cm x 9.5cm x 35cm
• Material: Plastic and aluminium alloy

Typical Applications

• Workshop and garage lighting during repairs or builds
• Automotive work in low-light conditions
• Electrical and plumbing tasks in unlit spaces
• Construction sites where mains power is unavailable
• Inspection work in confined or poorly lit areas
• Camping, caravanning, and outdoor use
• Emergency lighting at home during power cuts

How to Use

• Charge before use: Connect the unit to a USB power source and charge the battery fully before first use.

• Mount or position: Press the rear magnet against any ferrous metal surface, or use the hanging hook to suspend the light overhead.

• Select your light: Activate the front COB for broad task lighting or the top LED for a secondary or directional source.

• Set brightness: Cycle through the available modes on your chosen light to reach the output level you need.

• Charge devices: Plug a phone or tablet into the rear USB port to draw power from the built-in battery.

• Recharge after each session: Plug the unit back in after use to keep the battery ready for the next job.

Frequently Asked Questions (FAQs)

• What does COB mean on a work light?
  COB stands for Chip on Board. Multiple LED chips sit directly on a single substrate, producing a brighter and more even beam than a standard single-chip LED at the same wattage.

• How do I know when a rechargeable work light is fully charged?
  Most units use a charging indicator that changes colour or turns off when the battery is full. Check the markings on the light itself or the product label for the specific signal your unit uses.

• Can a 4000mAh battery fully charge a smartphone?
  A 4000mAh battery can deliver roughly one full charge to most smartphones, though actual output depends on the conversion efficiency of the unit and the capacity of the phone battery being charged.

• Will a magnetic mount scratch or damage metal surfaces?
  Magnets on work lights grip firmly but do not typically scratch or mark painted or coated metal surfaces under normal use. Placing a thin cloth between the magnet and a sensitive finish reduces any risk of marking.

• Is it safe to charge a Li-ion work light battery overnight?
  It is generally safer to remove the unit from charge once the battery is full rather than leaving it connected overnight. Avoid charging in very hot or very cold environments to preserve battery condition over time.

Summary

The Blue Spot Tools Electralight 1000 Lumen Rechargeable COB LED Work Light combines a 10W front COB, a 5W top LED, and a 4000mAh battery with power bank output into a single 0.51kg unit. A rear magnet and hanging hook keep both hands free on site. Backed by the Blue Spot Tools lifetime guarantee.