Blue Spot Tools Electralight Rechargeable COB Multi Angle Work Light Orange 65308

Blue Spot Tools Electralight Rechargeable COB Multi Angle Work Light 65308

MPN: 65308

Barcode: 5028734653083

Weight: 0.52kg

Overview:

The Electralight COB Work Light produces 300 lumens from the main panel and 50 lumens from the built-in top torch. A 2-phase switch lets you choose between output modes, extending how long each charge lasts.

The body rotates through 180°, so you can angle the beam without repositioning the unit. Two heavy-duty magnets on the base and a large magnet on the rear fix it to ferrous metal surfaces in seconds.

A soft-touch finish improves grip on site or in the workshop. The integrated Li-Ion battery charges in 3.5 to 4 hours and delivers up to 3 hours of operating time.

Key Features and Benefits

• 300-lumen COB output: floods large work areas with even, shadow-free light to help you see clearly in poorly lit spaces.
• Built-in 50-lumen top torch: provides targeted, directional light for focused close-up tasks when the full beam is not needed.
• 2-phase switch: lets you match light output to the job and extend battery life between charges.
• 180° body rotation: lets you aim the beam precisely without moving or re-mounting the unit.
• Magnetic base and rear magnet: hold the light to steel and iron surfaces, freeing both hands during work.
• Rear hanging hook: provides an additional hands-free option on non-magnetic surfaces.
• Soft-touch finish: improves grip when working in awkward positions or dirty conditions.
• Integrated Li-Ion battery: removes the need for disposable cells, so the light is always ready to charge and reuse.
• Charge state indicator: displays red while charging and turns green when the battery reaches full capacity.
• Travel adapter included: lets you charge the light directly without the cradle base when working away from a fixed station.

Specs & Attributes

• Main COB lumen output: 300 lumens
• Top torch lumen output: 50 lumens
• Battery type: 18650 3.7V 1800mAh rechargeable Li-Ion
• Charging time: 3.5 - 4 hours
• Operating time: 2.5 - 3 hours
• IP rating: IP20 (not suitable for use in wet or damp locations)
• Input voltage: 5V DC / 100-240V AC, 50/60Hz
• Energy saving: 2-phase switch
• Body rotation: 180°
• Product weight: 0.52kg

Typical Applications

• Workshop and garage lighting during mechanical work
• Engine bay and under-vehicle inspection
• Electrical installation in confined or low-light spaces
• Plumbing work in wall cavities or under floors
• Loft access and roof space inspection
• Joinery and carpentry in poorly lit areas
• Site work in dry indoor environments

How to Use

• Charge via cradle: Seat the light in the charging base, connect the lead and plug in. The indicator turns red to confirm charging has started.

• Charge via travel adapter: Connect the charging lead to the travel adapter and plug directly into the back of the light. The same red indicator confirms it is charging.

• Confirm full charge: When the indicator switches from red to green, the battery is at full capacity. Disconnect from the power supply.

• Switch on and select mode: Press the power button on the front of the unit. Use the 2-phase switch to select the 300-lumen COB output or the 50-lumen top torch.

• Position the light: Rotate the body up to 180° to aim the beam where needed. Attach via the base or rear magnets on metal surfaces, or hang from the rear hook.

Frequently Asked Questions (FAQs)

• What does COB mean in a work light?
  COB stands for Chip on Board. It mounts multiple LED chips onto a single circuit board, producing a bright, even output with fewer hot spots than individual LED arrangements.

• What does an IP20 rating mean for a work light?
  IP20 means the unit is protected against solid objects larger than 12mm but has no moisture resistance. Use it in dry indoor environments only - not in wet or damp locations.

• What surfaces will a magnetic work light bond to?
  Magnetic work lights attach to ferrous metals such as steel and cast iron. They will not bond to aluminium, brass, copper, or non-metallic surfaces.

• How do I know when a rechargeable work light is fully charged?
  The charge state indicator on this light turns red during charging and switches to green once the battery is at full capacity. Disconnect it from the power supply at that point.

• What is the difference between lumens and watts in a work light?
  Lumens measure the total amount of light a fitting produces. Watts measure the power it consumes. A higher lumen output at lower wattage means the light produces more output per unit of energy used.

Summary

The Electralight 65308 is a rechargeable multi-angle work light combining 300 lumens from the main COB panel with 50 lumens from the built-in top torch. Magnetic mounts, a rear hook, and 180° body rotation make it well-suited to hands-free use across a range of indoor professional tasks. The integrated Li-Ion battery, charging cradle, and travel adapter keep it ready to go without the need for disposable cells. Backed by the Blue Spot Tools manufacturer's lifetime guarantee.