Blue Spot Tools Electralight 100 Lumen SMD Mini Work Light And Torch (Without Batteries) 65201

Blue Spot Tools Electralight 100 Lumen SMD Mini Work Light and Torch (Without Batteries)

MPN: 65201

Barcode: 5028734652017

Weight: 0.08kg

Overview:

The Blue Spot Tools Electralight Mini Work Light and Torch puts 100 lumens of bright SMD LED light exactly where you need it. A 20 SMD LED front panel handles general task lighting, while a 3 LED top light adds a secondary 5 lumen beam for close-up work.

The head rotates on a full 360° axis, so you can angle the light without shifting position. A high-strength magnet on the base and a rear hanging hook both leave your hands free while you work. The light runs on 3 x AAA batteries (not included). Its compact size makes it easy to carry in a tool bag or store in a drawer between jobs.

Key Features and Benefits

• Compact and Portable: Small enough to carry to any job site, vehicle, or confined space without taking up room in your tool bag.
• Bright SMD Front Panel: 20 SMD LEDs produce a consistent, wide-spread beam - far more even than older single-LED designs.
• Secondary Top Light: The 3 LED top light lets you switch to a focused, lower-output beam for up-close or detail work.
• Full 360° Rotation: Point the beam at any angle without repositioning the whole unit, which saves time in tight spaces.
• Hands-Free via Magnet: The base magnet attaches to car bodywork, shelving, machinery, and other metal surfaces for stable, tool-free mounting.
• Hands-Free via Hanging Hook: The rear hook suspends the light from joists, pipes, or fittings so both hands stay free.
• Lightweight Body: Light enough to handle for extended periods without arm fatigue during long jobs.
• Lifetime Guarantee: Covered by the Blue Spot Tools manufacturer's lifetime guarantee.

Specs & Attributes

• Front Light Output: 100 lumens
• Front Light Type: 20 SMD LED
• Top Light Output: 5 lumens
• Top Light Type: 3 LED
• Rotation: 360°
• Battery Requirement: 3 x AAA (not included)
• Weight: 0.08kg

Typical Applications

• Working under vehicles in a garage or on a driveway
• Electrical work in dark cabinets, ceiling voids, or consumer units
• Plumbing repairs under sinks or behind access panels
• Loft inspections and work in attic spaces
• Workshop tasks requiring directed task lighting
• Caravan, motorhome, or boat maintenance and repairs
• Emergency or backup lighting at home

How to Use

• Fit the Batteries: Open the battery compartment and insert 3 x AAA batteries, matching polarity to the markings inside.

• Switch On: Press the power button to activate the front SMD panel. Press again to switch to the top LED light, depending on your task.

• Set the Angle: Rotate the head on its 360° axis to direct the beam at your working area before mounting.

• Mount Hands-Free: Press the base magnet against a nearby metal surface, or loop the rear hook over a joist, pipe, or fitting.

• Switch Off and Store: Turn off the light after use and store it in a dry location. Remove the batteries for long periods of storage.

Frequently Asked Questions (FAQs)

• What does SMD mean in an LED work light?
  SMD stands for Surface Mounted Device. SMD LEDs mount directly onto a circuit board, producing a wider, more consistent beam than older through-hole LEDs. They generate more light output relative to their size, which suits compact work lights where space is limited.

• Can rechargeable AAA batteries be used in an LED work light?
  Yes. Rechargeable NiMH AAA batteries work in most AAA-powered LED lights. They typically run at 1.2V rather than 1.5V, which may reduce brightness slightly compared to alkaline cells. For most indoor tasks and confined-space work, the difference is minimal.

• How long do AAA batteries last in a 100 lumen work light?
  Run time depends on the battery brand, age, and whether you use the full 100 lumen front panel or the lower 5 lumen top light. Fresh alkaline AAA batteries in a 100 lumen SMD light typically last between 2 and 5 hours of continuous use.

• Is 100 lumens bright enough for garage and automotive work?
  100 lumens works well for close-range task lighting and confined spaces such as engine bays, under-sink areas, and ceiling voids. For lighting a full workshop or working at distance, a higher-output flood light in the 300-500 lumen range would be more suitable.

• Is it safe to place a magnetic work light near car electronics?
  Strong magnets can affect magnetic media and some sensitive instruments. Avoid placing a magnetic work light directly on items such as key fobs, navigation systems, or exposed circuit boards. For general automotive bodywork and mechanical tasks, the magnet poses no practical risk to standard metal components.

Summary

The Blue Spot Tools Electralight 100 Lumen SMD Mini Work Light and Torch is a practical, no-fuss lighting tool for automotive work, home repairs, and trade use. With a bright 20 SMD front panel, a secondary 3 LED top light, 360° rotation, and two hands-free mounting options, this compact torch tackles a wide range of jobs in dark or confined spaces. Backed by the Blue Spot Tools manufacturer's lifetime guarantee.