Blue Spot Tools Ironmongery 76mm Black Powder Coated Tower Bolt 78000

Blue Spot Tools Ironmongery 76mm Black Powder Coated Tower Bolt

MPN: 78000

Barcode: 5028734780000

Size: 76mm

Weight: 0.13kg

Colour: Black

Overview:

Built from carbon steel with a black powder coat finish, this 76mm tower bolt resists corrosion and holds up in outdoor conditions. It suits wooden gates, garden fences, shed doors, and similar external fixtures.

All necessary fittings are supplied, so no additional hardware is required for installation. The bolt is ready to fit straight from the pack.

Key Features and Benefits

• Carbon Steel Construction: Handles the demands of regular outdoor use without bending or deforming.
• Black Powder Coat Finish: Acts as a barrier against rust on exposed exterior surfaces.
• All Fixings Included: Every fitting needed for installation is supplied in the pack.
• 5 Year Guarantee: Backed by a 5 year manufacturer's guarantee for added peace of mind.

Specs & Attributes

• Material: Carbon steel
• Finish: Black powder coated
• Bolt Size: 76mm
• Weight: 0.13kg

Typical Applications

• Securing wooden garden gates
• Fastening shed doors
• Locking garden fence access points
• Outbuilding and summerhouse doors
• Side access gates
• External storage unit doors

How to Use

• Mark the fixing positions: Hold the bolt plate against the door at your chosen height and mark the screw holes with a pencil.

• Pre-drill pilot holes: Drill pilot holes at each marked point to prevent the timber from splitting.

• Fix the bolt plate: Attach the bolt plate to the door using the supplied screws.

• Fit the keep: Align the staple keep with the bolt and fix it to the door frame, so the bolt slides freely into position.

• Test the action: Slide the bolt back and forth to confirm it moves freely. Adjust the keep if needed before tightening fully.

Frequently Asked Questions (FAQs)

• What is the difference between a tower bolt and a barrel bolt?
  Tower bolts are heavier than barrel bolts and better suited to outdoor use on gates and external doors. Barrel bolts are a lighter option, more commonly used on internal doors such as bathroom or bedroom doors.

• What size tower bolt do I need for a garden gate?
  For most standard wooden garden gates, a 76mm to 100mm bolt works well. Heavier or wider gates may benefit from a longer bolt for added holding strength.

• Can a tower bolt be used on a metal gate?
  Tower bolts are designed for wooden gates and doors. On metal gates, you would need to verify screw compatibility with the material or use self-tapping screws instead.

• How do I stop a tower bolt from sticking or jamming?
  Apply a dry lubricant or light oil to the sliding bar and keep. The most common cause of sticking is a misaligned staple - check the keep position and refix if needed.

• Does a powder coated finish need painting or sealing?
  No. Powder coat comes ready to use with no additional treatment needed. Avoid abrasive cleaners that could scratch the surface and expose the metal beneath to moisture.

Summary

This 76mm tower bolt from Blue Spot Tools secures outdoor wooden gates, shed doors, and garden fences without any extra hardware needed. Carbon steel construction with a black powder coat finish makes it suited to permanent outdoor installations. A 5 year manufacturer's guarantee is included.