Blue Spot Tools Ironmongery 102mm Black Powder Coated Tower Bolt 78001

Blue Spot Tools Ironmongery 102mm Black Powder Coated Tower Bolt

MPN: 78001

Barcode: 5028734780017

Size: 102mm

Weight: 0.17kg

Colour: Black

Overview:

This 102mm tower bolt from Blue Spot Tools is made from carbon steel with a black powder coat finish, built to handle outdoor conditions on gates, fences, and shed doors. The larger bolt length makes it well suited to wider or heavier wooden gates where a shorter bolt may not offer the reach needed.

All necessary fixings are included, so the bolt is ready to fit without sourcing additional hardware. The powder coat acts as a barrier against rust on exposed exterior surfaces.

Key Features and Benefits

• Carbon Steel Build: Handles regular outdoor use without bending or losing shape over time.
• Black Powder Coat Finish: Forms a protective layer against rust and corrosion on exposed exterior surfaces.
• 102mm Bolt Length: Suits wider gate openings or larger door frames where a shorter bolt would fall short.
• All Fixings Supplied: Every fitting required for installation is included in the pack.
• 5 Year Guarantee: Covered by a 5 year manufacturer's guarantee.

Specs & Attributes

• Material: Carbon steel
• Finish: Black powder coated
• Bolt Size: 102mm
• Weight: 0.17kg

Typical Applications

• Securing wider wooden garden gates
• Fastening larger shed or outbuilding doors
• Locking garden fence access points
• Side gate and side access door security
• External storage unit and workshop doors
• Summerhouse and garden room entry doors

How to Use

• Mark the fixing positions: Hold the bolt plate against the door at your chosen height and mark each screw hole with a pencil.

• Drill pilot holes: Drill a pilot hole at each marked point to prevent the timber from splitting during fitting.

• Attach the bolt plate: Fix the bolt plate to the door using the supplied screws.

• Position the staple keep: Align the keep with the bolt on the door frame and mark its fixing holes before screwing it into place.

• Check the action: Slide the bolt into the keep to confirm it moves freely. Adjust the keep position if needed before tightening fully.

Frequently Asked Questions (FAQs)

• What is a tower bolt used for?
  A tower bolt is a sliding fastening used to secure doors and gates from one side. They are most common on garden gates, shed doors, and external access points where a simple, tool-free latch is needed.

• Is a 102mm tower bolt suitable for a heavy gate?
  A 102mm bolt works well on standard wooden garden gates. For very heavy or wide double gates, pairing two bolts - one at the top and one at the bottom - gives better holding strength.

• Can a powder coated tower bolt be used in wet or coastal conditions?
  Powder coat provides good resistance to moisture on standard outdoor installations. In coastal areas with high salt exposure, checking the finish periodically and cleaning off any deposits will help maintain it.

• How do I fit a tower bolt keep to a timber post?
  Hold the bolt in the closed position against the post to mark the keep location accurately. Pre-drill pilot holes, then screw the keep into place and test the bolt slides in cleanly before final tightening.

• What screws should I use to fit a tower bolt to hardwood?
  For hardwood gates or frames, always pre-drill to avoid splitting the timber. Use the supplied screws where possible, or replace with stainless steel screws of the same gauge if fitting into hardwood that splits easily.

Summary

The Blue Spot Tools 102mm black powder coated tower bolt is a carbon steel external bolt suited to wooden gates, shed doors, and garden fences. At 102mm, it offers more reach than shorter alternatives on wider openings. All fixings are included and a 5 year manufacturer's guarantee is provided.