Joint It Simple Paving Jointing Pointing Compound 12.5kg 4 Colours

Joint It Simple Paving Jointing Pointing Compound 12.5kg Tub

4 Colours:

• 12.5-AW-N - Neutral
• 12.5-AW-G - Grey
• 12.5-AW-DG - Dark Grey
• 12.5-AW-B - Black

12.5kg Buckets:

Joint it Simple is a paving jointing compound that is easy to apply. It is loved by professional landscapers, builders, and homeowners. This compound can be used for joints 3mm to 5mm wide. Having 5mm or broader joints is best when building a patio from scratch. The product can be used starting from 3mm, but more effort is required to get the product to full depth. Joint it Simple can be swept into the joints of slabs that have been already soaked with water. It is compatible with all natural stone and concrete paving products.

It's an excellent solution for all home improvement requirements, garden patio pointing to commercial projects.

Joint-It's simple paving jointing compound is water permeable, no more long lasting puddles in your patio, this is also in the news recently because of all the construction and hard surface projects that prevent rain from seeping into the ground forcing water into rivers and out to sea and not where we need it.

It should be performed by a professional or someone with some experience. Please take a look at the video to see how simple it is to apply the solution for a perfect result, and we've also compiled some pdfs that show you how to apply the product for a flawless finish. These can be found on the downloads page under "How To Use."

Joint it Wide Joint Patio Paving Jointing Compound How to Instructions Video Demonstration

Typical Uses:

• For use in big joints encompassing 3/5mm and up to 25mm deep.
• For all sorts of paving stones, bricks, concrete slabs, and natural stone pointing.

Advantages:

• 12.5kg buckets
• Sand and cement pointing techniques are both time-consuming and challenging.
• Sweeping in the jointing compound means it gets the job done faster and better with a more consistent result and stands the test of time.
• Joint is a moisture-resistant, non-leaching adhesive that's great for natural stone. It's also safe for natural stone because it won't stain. However, limestone and honed black granite should be pre-sealed prior to pointing it with Joint-it Simple first.
• The cutting-edge binding technology in Joint it Simple sets this top-of-the-line jointing compound apart from the competition.
• Premium patio grout is simple to use and provides easy jointing. Joints that are both strong and durable, with longer-lasting connections.
• It's simple to operate, with a water brush in and water. Take a look at the video for further information.
• Increased lifespan, greater flexibility and many more advantages over traditional sand and cement without mobility qualities.
• Joint-It Simple sets rock hard, unlike other grouts and mortars that might fracture and loosen, allowing weeds to grow.
• It's designed to last long, with seven distinct expert types of glue that will ensure it stays in your joints for many years.
• With a bit of work and fantastic results, all you need is a hard or soft broom, water, preferably a hose, and a tub of Joint It Simple.
• Now you can buy it in four distinct colours: neutral, grey, dark grey, and black.

Instructions How to use Joint it Simple:

1. Soak paving with water
2. Sweep Joint It Simple into joints
3. Soak again and wait for 15 to 45 minutes
4. This time, use a soft broom to sweep away any extra product from the slab

If the product isn't fully used, it can be stored under water. For storage, fill the bucket well above the product.