Blue Spot Tools Ironmongery 50mm Zinc Plated Suffolk Latch 78025

Blue Spot Tools Ironmongery 50mm Zinc Plated Suffolk Latch

MPN: 78025

Barcode: 5028734780253

Weight: 0.45kg

Overview:

Carbon steel construction gives this 50mm zinc plated Suffolk latch the strength needed for outdoor ironmongery. A zinc plated finish shields the steel against corrosion, keeping the latch working through wet weather and changing seasons.

Designed for permanent outdoor fitting on wooden garden gates, fence gates, and shed doors, all the necessary fixings are included in the pack.

Key Features and Benefits

• Carbon Steel Build: Handles the stresses of outdoor gate use without bending or weakening over time.
• Zinc Plated Finish: Creates a protective barrier against rust and corrosion from rain and outdoor exposure.
• Fixings Included: All necessary fittings are supplied - no additional hardware required to complete the installation.
• Permanent Outdoor Fitting: Built for fixed installation on wooden structures, not a temporary or seasonal solution.
• 5-Year Guarantee: Blue Spot Tools backs this latch with a 5-year manufacturer's guarantee.

Specs & Attributes

• Material: Carbon steel
• Finish: Zinc plated
• Size: 50mm
• Weight: 0.45kg
• Use: External / Outdoor

Typical Applications

• Wooden garden gates
• Fence gates
• Shed doors
• Outbuilding doors
• Garden access gates
• Ledged and braced external doors

How to Use

• Check the Gate: Confirm a cross timber or horizontal rail sits at the right height to support the latch on the back of the gate.

• Mark and Drill: Draw a vertical line 50mm from the leading edge of the gate, then drill a 32mm hole through at that point.

• Fit the Handle: Insert the handle and lever through the hole so the lever sits level along the bottom of the drilled opening.

• Attach the Latch Bar: Fix the latch bar across and over the lever on the opposite side of the gate, securing it in position.

• Fit the Keep: Secure the keep to the gate post so the latch bar drops into it cleanly when the gate closes.

• Test Operation: Open and close the gate several times to confirm smooth movement, then adjust the keep position if needed.

Frequently Asked Questions (FAQs)

• What is the difference between a Suffolk latch and a Norfolk latch?
  The key distinction is the back plate. A Suffolk latch has no back plate - the handles attach directly to the gate through plates at the top and bottom of the handle. A Norfolk latch features a back plate that the handle is mounted to. The installation process is broadly the same for both.

• Can a Suffolk latch be used on an internal door?
  As well as outdoor gates and external doors, a Suffolk latch also works on internal cottage-style ledged and braced doors.

• Does a Suffolk latch provide enough security on its own for an external gate?
  A Suffolk latch is a latching mechanism, not a lock. On an external door or gate where security is required, an additional secure lock should be fitted alongside it.

• What size hole do I need to drill when fitting a Suffolk latch?
  A 32mm diameter hole is standard, drilled with the centre 50mm in from the leading edge of the gate. Always refer to the fitting instructions supplied with your latch, as dimensions can vary between products.

• Which side of the gate should the handle be fitted to?
  The handle with the thumb lever must be fitted to the side of the gate that opens away from you. The latch bar and keeper go on the opposite side.

Summary

The Blue Spot Tools 50mm zinc plated Suffolk latch is a carbon steel gate latch built for permanent outdoor use. The zinc plated finish offers corrosion resistance, making it well-suited to wooden garden gates, fence gates, and shed doors. All fixings are included, and the product is backed by a 5-year manufacturer's guarantee.