Blue Spot Tools Ironmongery 152mm Zinc Plated Ring Latch 78020

Blue Spot Tools Ironmongery 152mm Zinc Plated Ring Latch

MPN: 78020

Barcode: 5028734780208

Size: 152mm

Weight: 0.66kg

Overview:

The 152mm zinc plated ring latch from Blue Spot Tools is built from carbon steel. A zinc plated coating shields the metal against rust and outdoor weathering. At 152mm, it suits a range of permanent outdoor timber fittings, from garden gates to shed doors.

This latch ships with all the necessary fixings, so you need no additional hardware before installation. It fits directly onto wooden gates, fence posts, and shed doors for a clean, permanent result.

Key Features and Benefits

• Carbon Steel Body: Offers the strength needed to handle repeated daily use on permanent outdoor fittings.
• Zinc Plated Coating: Protects against rust and the effects of prolonged outdoor moisture exposure.
• Ring Operated Mechanism: Turning either ring lifts the lever arm, making the gate easy to open from either side.
• All Fixings Included: Ships complete with everything needed for installation - no extra hardware to source.
• Permanent Outdoor Rated: Stays fixed on exposed timber structures and handles year-round outdoor conditions.

Specs & Attributes

• Size: 152mm
• Weight: 0.66kg
• Material: Carbon Steel
• Finish: Zinc Plated
• Suitability: External Use

Typical Applications

• Wooden garden gate installations
• Side gate fastenings
• Shed door closures
• Fence panel gate fittings
• Outbuilding and workshop entrance doors
• Summer house and cabin door fastenings

How to Use

• Mark the Position: Close the gate fully and hold it flush with the post. Mark the latch position with a pencil.

• Mark the Screw Holes: Hold the latch body against the gate and mark all screw hole positions clearly.

• Pre-Drill Pilot Holes: Drill pilot holes slightly smaller than the included screws to prevent the timber from splitting.

• Drill the Centre Hole: Drill through the gate at the marked centre point to accommodate the spindle bar.

• Fit the Latch: Insert the spindle through the gate, attach both ring sides, and secure with the included fixings.

• Fit the Strike Plate: Close the gate and position the strike plate on the post. Fix in place, then test the action before finishing.

Frequently Asked Questions (FAQs)

• How does a ring latch work?
  A ring latch uses a metal ring on each side of the gate, connected by a spindle bar. Turning the ring lifts a lever arm, which clears the strike plate and allows the gate to open. When the gate closes, the lever arm drops back into the catch.

• Can a ring latch be operated from both sides of a gate?
  Yes. Each ring connects to a shared spindle bar that runs through the gate. This lets you open or close the gate from either side without reaching over or around.

• What is the difference between zinc plated and galvanised steel?
  Zinc plating applies a thin zinc layer via an electrochemical process. Hot-dip galvanising applies a thicker zinc coating by immersing the metal in molten zinc. Both protect against corrosion, but galvanising typically produces a heavier coating suited to harsher environments.

• Do ring latches work on both inward- and outward-swinging gates?
  Ring latches can generally be fitted to gates that swing in either direction. The strike plate position may need slight adjustment depending on which way the gate opens.

• How do I stop an outdoor gate latch from stiffening over time?
  Apply a light machine oil or lubricating spray to the moving parts periodically. Wipe away any excess after application to avoid attracting dirt.

Summary

The Blue Spot Tools 152mm Zinc Plated Ring Latch is a weather-resistant gate fastening built from carbon steel. The zinc plated finish protects the steel against rust for permanent outdoor use on wooden gates, shed doors, and fence posts. All fixings are included, and the latch carries a 5-year guarantee.