Blue Spot Tools Ironmongery 152mm Black Powder Coated Ring Latch 78018

Blue Spot Tools Ironmongery 152mm Black Powder Coated Ring Latch

MPN: 78018

Barcode: 5028734780185

Weight: 0.66kg

Colour: Black

Overview:

This 152mm ring latch from Blue Spot Tools uses a carbon steel body with a black powder coated finish. The coating acts as a barrier against moisture and surface rust, keeping the latch protected through outdoor conditions.

This latch works for permanent outdoor installation on wooden garden gates, fences, and shed or outbuilding doors. All required fittings come in the box. Blue Spot Tools backs this latch with a 5 year guarantee.

Key Features and Benefits

• Carbon Steel Body: Handles the physical wear of daily gate and door use without bending or deforming.
• Black Powder Coat: Forms a protective barrier against moisture, helping to prevent rust on exposed outdoor hardware.
• All Fixings Included: Every fixing required for installation comes in the box - nothing additional needs to be sourced before fitting.
• Rated for Permanent Outdoor Use: Designed for fixed outdoor installation on exposed wooden structures, not just sheltered or temporary applications.

Specs & Attributes

• Length: 152mm
• Material: Carbon steel
• Finish: Black powder coat
• Weight: 0.66kg
• Use: External

Typical Applications

• Wooden garden gates
• Garden fence access points
• Shed doors
• Outbuilding doors
• Workshop entrances
• Side access gates

How to Use

• Mark Fixing Positions: Hold the latch body against the gate face and mark the pilot hole positions with a pencil.

• Drill Pilot Holes: Use a suitable drill bit to create pilot holes at the marked positions to avoid splitting the timber.

• Fix the Latch Body: Align the latch plate with the pilot holes and secure it using the supplied fixings.

• Mark and Fix the Keep: Position the keep on the gate post or frame so it lines up with the latch bar, then fix it in place.

• Test and Adjust: Open and close the gate to confirm the latch bar seats correctly in the keep before finishing.

Frequently Asked Questions (FAQs)

• What is a ring latch and how does it work?
  A ring latch has a ring-shaped handle on one face of the gate and a lifting bar that drops into a keep fixed to the gate post. Lifting the ring raises the bar and allows the gate to swing open.

• Can a ring latch be fitted to a metal or PVC gate?
  Ring latches are designed for wooden gates, where screws can grip the timber directly. Metal or PVC gates need fixings and hardware specifically rated for those materials.

• What is the difference between a ring latch and a thumb latch?
  A ring latch uses a ring handle to lift the fastening bar. A thumb latch - sometimes called a Suffolk latch - uses a lever operated by the thumb. Both serve a similar purpose but differ in operation and appearance.

• Can a ring latch be used on a left-hand or right-hand hung gate?
  Most ring latches can be fitted on either a left-hand or right-hand hung gate by adjusting the position of the latch body and keep. Check the keep can be positioned on the relevant gate post before fitting.

• What upkeep does outdoor powder coated gate ironmongery need?
  Powder coated hardware needs very little upkeep. Wiping the surface with a damp cloth periodically removes dirt and debris. Avoid abrasive cleaners, as these can wear through the coating and leave the metal exposed.

Summary

The Blue Spot Tools 152mm ring latch offers a carbon steel build with a black powder coated finish, designed for permanent outdoor use on wooden gates, fences, and outbuilding doors. All necessary fixings are included, and the latch is backed by a 5 year guarantee from Blue Spot Tools.