Blue Spot Tools Ironmongery 152mm Black Powder Coated Twisted Ring Latch 78019

Blue Spot Tools Ironmongery 152mm Black Powder Coated Twisted Ring Latch

MPN: 78019

Barcode: 5028734780192

Weight: 0.66kg

Overview:

This 152mm twisted ring latch from Blue Spot Tools is made from carbon steel. The black powder coat finish protects the metal against corrosion. It suits permanent outdoor installation on wooden gates, fences, and shed doors.

All necessary fixings are included. The latch body measures 152mm and weighs 0.66kg. It comes backed by a 5-year Blue Spot Tools guarantee.

Key Features and Benefits

• Corrosion-Resistant Finish: The black powder coat shields the carbon steel against rust and moisture in outdoor conditions.
• Carbon Steel Body: Made from carbon steel, which Blue Spot specify for increased strength in outdoor ironmongery applications.
• Complete Kit: All fixings come included - nothing extra to source before fitting.

Specs & Attributes

• Size: 152mm
• Weight: 0.66kg
• Material: Carbon steel
• Finish: Black powder coated
• Use: External

Typical Applications

• Wooden garden gate
• Side access gate
• Driveway gate
• Garden shed door
• Fence access point
• Garden outbuilding door
• Summer house door

How to Use

• Mark the Position: Hold the latch body against the gate at your chosen height. Mark each fixing hole location with a pencil.

• Drill Pilot Holes: Use a drill bit slightly smaller than the supplied screws. Drill pilot holes at each marked point to avoid splitting the timber.

• Attach the Latch Body: Fix the latch plate to the gate using the supplied screws. Tighten until the plate sits flush with the wood.

• Position the Strike Plate: Close the gate and mark where the latch bar meets the post. Fix the catch at that point using the supplied hardware.

• Test the Action: Open and close the gate several times to check the latch engages and releases cleanly. Adjust the catch position if needed.

Frequently Asked Questions (FAQs)

• What is the difference between a ring latch and a thumb latch?
  A ring latch uses a twisted ring handle to lift the latch bar - typically operable from both faces of the gate. A thumb latch uses a lever pressed with the thumb on one side only. Ring latches suit a more traditional ironmongery style.

• Is a ring latch secure enough to keep a gate closed?
  A ring latch holds a gate shut but does not lock it. For security against unauthorised access, pair it with a padlock or a separate bolt.

• What type of gate is a powder-coated ring latch designed for?
  This latch is designed for wooden gates, fences, and shed doors. It is specified for outdoor use and permanent installation - not for temporary or indoor applications.

• How do I maintain a powder-coated gate latch?
  Wipe down periodically with a damp cloth to remove dirt and moisture. Avoid abrasive pads or harsh cleaners, which can scratch the coating. Check fixings once a year for any signs of loosening.

• What does "permanent installation" mean for a gate latch?
  It means the latch screws directly into the timber and is not designed for regular removal and repositioning. This differs from temporary hook-and-eye or clip fittings, which are not fixed in the same way.

Summary

This Blue Spot Tools 152mm ring latch is built from carbon steel with a black powder coat finish for corrosion resistance in outdoor conditions. It suits permanent installation on wooden gates, fences, and shed doors, and comes with all fixings included. A 5-year guarantee is backed by Blue Spot Tools.