Blue Spot Tools Ironmongery 50mm Black Powder Coated Suffolk Latch 78024

Blue Spot Tools 50mm Black Powder Coated Suffolk Latch

MPN: 78024

Barcode: 5028734780246

Weight: 0.45kg

Colour: Black

Overview:

This 50mm Suffolk latch from Blue Spot Tools is built from carbon steel with a black powder coated finish. The coating forms a protective layer that resists rust and corrosion, making it well suited to year-round outdoor conditions. It comes supplied with all fixing hardware needed for installation.

The latch operates on a simple thumb lever and bar mechanism. Pressing the thumb lever lifts the latch bar clear of the keeper, allowing the gate or door to open. It mounts directly to the surface of the timber - no morticing required.

Key Features and Benefits

• Carbon Steel Construction: Provides the structural strength to handle regular use on outdoor gates and doors.
• Black Powder Coated Finish: Forms a protective barrier that resists rust and corrosion in outdoor conditions.
• All Fixings Included: Comes with all hardware needed to fit - no additional purchases required.
• Surface-Mount Design: Fits directly onto timber without morticing or specialist tools.
• 5 Year Guarantee: Backed by Blue Spot Tools against manufacturing faults.

Specs & Attributes

• Material: Carbon steel
• Finish: Powder coated
• Colour: Black
• Size: 50mm
• Weight: 0.45kg
• Use: External

Typical Applications

• Wooden garden gates
• Fence gates
• Shed doors
• Workshop and outbuilding access doors
• Paddock and field gates
• Timber garden screens or partitions

How to Use

• Mark the Position: Hold the latch against the gate at a comfortable height and mark the fixing points and latch bar slot in pencil.

• Cut the Latch Bar Slot: Drill or rout a slot through the gate timber to allow the latch bar to pass through cleanly.

• Fix the Handle Plate: Screw the handle and thumb lever assembly to the gate face using the fixing holes provided.

• Attach the Keeper: Fix the keeper to the gate post or frame, aligning it with the latch bar so the bar drops in cleanly when the gate closes.

• Test the Action: Open and close the gate several times to check the bar seats properly in the keeper. Adjust the keeper position if needed.

Frequently Asked Questions (FAQs)

• What is the difference between a Suffolk latch and a Norfolk latch?
  A Suffolk latch has no back plate - the handle and thumb lever are fixed directly to the door surface. A Norfolk latch has a back plate that both components attach to. The fitting process is largely the same for both types.

• Is a Suffolk latch secure enough for an external gate?
  A Suffolk latch is a fastening device, not a security lock. For any gate that needs to be secured against unauthorised entry, a padlock or bolt should be fitted alongside the latch.

• Can a Suffolk latch be used on internal doors?
  Yes. Suffolk latches are commonly used on internal ledged and braced doors, cottage-style doors, and room dividers where a traditional look is preferred.

• Can a Suffolk latch be operated from both sides of the gate?
  The thumb lever operates the latch from one side only. The bar can be lifted manually from the other side. If two-way operation is needed, a ring turn or secondary lever can be added to the reverse face.

• What maintenance does a powder coated latch need?
  Wipe the latch down occasionally to remove dirt and moisture. Check the fixing screws periodically and tighten if needed. Avoid abrasive cleaners, which can damage the coating.

Summary

The Blue Spot Tools Ironmongery Latch (78024) is a 50mm carbon steel Suffolk latch with a black powder coated finish, built for outdoor use on wooden gates, shed doors, and fence access points. It comes with all necessary fixings and carries a 5 year guarantee.