Bond It Drive Alive Decking Oil Garden Wood Natural Finish 2.5 Litre BDDOC2

Bond It Drive Alive Garden Wooden Wood Deck Decking and Garden Timber Oil Treatment | Bond It Decking Oil 2.5 litre

Colour: Natural

MPN: BDDOC2

Barcode: 5060021369789

Size: 2.5 Litre

Product Overview:

Bond It Drive Alive Garden Wood Decking Oil Natural 2.5 Litre also suitable for treating all wooden and timber that's commonly found in the garden setting.

(Bond it Decking Oil) 2.5 Litre will give 2 coat coverage for approximately 10 meters square of decking

Bond-it 2.5 Litre decking oil has been specially formulated to revive weathered and tired hardwood and softwood timber decking.

Fast acting formular that has a natural finish and allows the original timber to be seen, restoring the wood back to its natural new appearance.

The wooden decking should be cleaned first with Bond It Drive Alive Garden Wood Decking Cleaner prior to treating decking boards it provides a good key and long lasting finish.

Bond-it DECKING OIL provides your deck with a natural looking protection by replacing natural oils in the wood.

It provides a protective barrier against water penetration where constant weathering can cause swelling and warping of the wood decking.

Suitable for use on untreated, previously oiled or weathered decking.

Bond It Decking Oil Finish Main Points:

• Nourishes wood replacing natural oils
• Specially formulated to revive weathered and tired hardwood and softwood timber decking.
• Resistant to UV light
• Restoring the wood back to its natural appearance.
• Helps to prevent mould and algae build up
  
• Can be used on all timber in the garden soft or hardwood.
• Waterproofs the timber.
• Ready to use.
• 2.5 Litres will give 2 coat coverage for approx. 10 meters square of decking
  

Preparation Prior to Applying (Bond It Decking Oil 2.5 Litre):

New Decking: For best results the timber should be allowed to weather for a minimum of 6 months before applying decking oil.

Test your timber: Splash some drops of water onto the dry wood, if water sits on the surface in beads, then the decking does not require deck oil.

How to Apply Bond-it Decking Oil:

1. Decking can be washed with a pressure washer.
2. Work from one end of the decking to the other.
3. if you do not have a pressure washer scrub the surface with a stiff brush then hose down.
4. Pour decking cleaner directly onto the deck surface.
5. Scrub the surface immediately using a stiff brush.
6. leave the cleaner on for 15 to 20 minutes.
7. Wash away all cleaning residue.
8. Ensure that the decking is dry do not apply in wet conditions or if rain is imminent.
9. Shake can thoroughly before use always test a small inconspicuous area prior to full application.
10. Apply a flood coat using a good quality brush or roller.
11. Apply a second coat once the first coat is dry approximately 6 hours.

FAQs for Bond-It Drive Alive Garden Wood Decking Oil – 2.5 Litre

1. What is the Bond-It Garden Wood Decking Oil used for?
The Bond-It Garden Wood Decking Oil is designed to enhance, protect, and maintain wooden decking and other outdoor wood surfaces. It provides a water-repellent and weather-resistant finish while enriching the wood’s natural beauty.

2. Bond It Decking Oil coverage for a 2.5-litre tin?
The 2.5-litre tin typically covers 25-30m² per coat, depending on the porosity and type of wood. Two coats are recommended for optimal protection.

3. Is Bond it Decking Oil suitable for all types of wood?
Yes, it is compatible with most types of softwood and hardwood, making it ideal for decking, fences, garden furniture, and sheds.

4. How does this Decking oil protect my decking?
The oil penetrates deeply into the wood, providing protection against water, UV rays, and weathering. It helps to prevent cracking, warping, and discolouration over time.

5. Can I apply Decking Oil to wet wood?
No, the wood surface must be clean, dry, and free from dust or grease before application to ensure proper adhesion and absorption.

6. How do I apply the The Bond It decking oil?
The oil can be applied using a brush, roller, or cloth. Apply evenly in the direction of the wood grain and allow it to dry between coats.

7. How long does it take to dry?
The oil dries to the touch in approximately 4-6 hours, but it is recommended to allow 24 hours between coats for the best results.

8. Can I use this oil on previously treated or painted wood?
It is best applied to bare or sanded wood for optimal penetration. If the wood has been previously treated, ensure the old finish is removed before applying the oil.

9. Is this product safe for the environment?
Yes, it is formulated to be low in VOCs and safe for outdoor use, ensuring minimal environmental impact.

The Bond-It Drive Alive Garden Wood Decking Oil – 2.5 Litre is the ideal solution for protecting and rejuvenating your outdoor wooden surfaces, delivering long-lasting results and preserving the natural beauty of the wood.

Leave 24 hours before subjecting to foot traffic

Always reed the Technical Data sheet prior to use. for full instructions

Also Available Bond it Decking Oil 5 Litre

(Please note that tins may get dented in transit and this is not a reason for return please do not purchase tined products if this is an issue for yourself.)