Bond It Decking Oil 5 litre Garden Wood Natural 5 Litre BDDOC5

Bond It Drive Alive Garden Wooden Wood Deck Decking and Garden Timber Oil Treatment | Bond It Decking Oil 5 litre

Colour: Natural

MPN: BDDOC5

Barcode: 5060021369772

Size: 5 Litre Large Tin

Bond It Decking Oil 5 litre Product Overview:

Bond It Drive Alive Garden Wood Decking Oil Natural 5 Litre also suitable for treating all wooden and timber that's commonly found in the garden setting, Bond-it decking oil has been specially formulated to revive weathered and tired hardwood and softwood timber decking.

Fast acting formular that has a natural finish and allows the original timber to be seen, restoring the wood back to its natural new appearance, the wooden decking should be cleaned first with Bond It Drive Alive Garden Wood Decking Cleaner prior to treating decking boards it provides a good key and long lasting finish.

Bond-it DECKING OIL Natural Finish provides your deck with a natural looking protection by replacing natural oils in the wood, it provides a protective barrier against water penetration where constant weathering can cause swelling and warping of the wood decking.

Suitable for use on untreated, previously oiled or weathered decking.

Decking Oil Finish Main Points:

• 5 Litre Trade Large Tin
• Nourishes wood replacing natural oils
• Specially formulated to revive weathered and tired hardwood and softwood timber decking.
• Resistant to UV light
• Restoring the wood back to its natural appearance.
• Helps to prevent mould and algae build up
  
• Can be used on all timber in the garden soft or hardwood.
• Waterproofs the timber.
• Ready to use.
• 2.5 Litres will give 2 coat coverage for approximately 10 meters square of decking
  

FAQs for Bond-It Drive Alive Garden Wood Decking Oil – 5 Litre

1. What is the Bond-It Garden Wood Decking Oil used for?
This decking oil is designed to enhance, protect, and maintain wooden decking and other outdoor wood surfaces. It provides a durable, water-repellent finish while enriching the natural beauty of the wood grain.

2. How much coverage does the 5-litre tin provide?
The 5-litre tin typically covers 50-60m² per coat, depending on the type and porosity of the wood. Two coats are recommended for optimal protection.

3. Can this oil be used on all types of wood?
Yes, the oil is suitable for most softwoods and hardwoods, including decking, fences, garden furniture, and sheds.

4. How does this oil protect my decking?
The oil penetrates deep into the wood to provide protection against water, UV rays, and weathering, reducing the risk of cracking, warping, and fading.

5. How should I prepare the surface before applying the oil?
Ensure the wood surface is clean, dry, and free of dirt, grease, and old coatings. Use a decking cleaner if necessary to remove algae or moss.

6. How is the decking oil applied?
Apply the oil using a brush, roller, or cloth, working along the grain of the wood for even coverage. Allow the first coat to dry before applying a second coat.

7. How long does it take to dry?
The oil dries to the touch in approximately 4-6 hours, but it’s recommended to allow 24 hours for full curing between coats.

8. Can I use this oil on previously treated wood?
For best results, remove any previous treatments, stains, or coatings. Sanding the surface may be necessary to ensure proper absorption.

9. Is this product environmentally friendly?
Yes, it is formulated to be low in VOCs and safe for outdoor use, with minimal impact on the environment.

10. Can this oil be used on garden furniture and other wood surfaces?
Yes, this oil is versatile and suitable for use on garden furniture, fences, and other outdoor wooden surfaces, offering the same protective and enhancing benefits.

The Bond-It Drive Alive Garden Wood Decking Oil – 5 Litre is the ideal choice for keeping your outdoor wood surfaces protected and looking their best year-round.

Preparation:

New Decking: The timber should be allowed to weather for a minimum of 6 months before applying decking oil

Test your timber splash some drops of water onto the dry wood, if water sits on the surface in beads, then the decking does not require deck oil

Applying Bond it Decking Oil:

1. Decking can be washed with a pressure washer.
2. Work from one end of the decking to the other.
3. if you do not have a pressure washer scrub the surface with a stiff brush then hose down.
4. Pour decking cleaner directly onto the deck surface.
5. Scrub the surface immediately using a stiff brush.
6. leave the cleaner on for 15 to 20 minutes.
7. Wash away all cleaning residue.
8. Ensure that the decking is dry do not apply in wet conditions or if rain is imminent.
9. Shake can thoroughly before use always test a small inconspicuous area prior to full application.
10. Apply a flood coat using a good quality brush or roller.
11. Apply a second coat once the first coat is dry approximately 6 hours.

Leave 24 hours before subjecting to foot traffic

Also Available Bond it Decking Oil 2.5 Litre

(Please note that tins may get dented in transit and this is not a reason for return please do not purchase tined products if this is an issue for yourself.)