Blue Spot Tools 24PC Cutting, Grinding & Polishing Rotary Tool Accessory Set 3.17mm (1/8") Arbor 19082

Blue Spot Tools 24PC Cutting, Grinding & Polishing Rotary Tool Accessory Set

MPN: 19082

Barcode: 5028734190823

Size: 3.17mm (1/8")

Weight: 0.16kg

Overview:

The Blue Spot Tools 24 Piece Rotary Accessory Set covers cutting, grinding, sanding, and polishing tasks in one set. It suits craft and hobby work and fits most standard rotary tools. Brushes, felt wheels, a sanding drum, and cutting discs cover surface prep through to final finishing. A polishing compound is also included for buffing work.

What's Included

• Nylon Wheel Brush: 1 Piece
• Steel Wire Wheel Brush: 1 Piece
• Nylon End Brush: 1 Piece
• Nylon Cup Brush: 1 Piece
• Arbor: 1 Piece
• Arbor for Felt Wheel: 1 Piece
• Sanding Drum (12.6mm): 1 Piece
• 13mm Felt Wheel: 6 Pieces
• 25mm Felt Wheel: 3 Pieces
• Felt Point: 1 Piece
• Brown Rubber Grinding Disc: 1 Piece
• Resinoid Cutting Disc: 5 Pieces
• Polishing Compound: 1 Piece

Key Features and Benefits

• Broad Task Coverage: Cutting discs, brushes, grinding, and polishing wheels handle multiple project stages without needing separate sets.
• Brush Variety: Nylon wheel, nylon end, nylon cup, and steel wire wheel brushes suit a range of surface-cleaning and deburring tasks.
• Polishing Result: The felt wheels and included polishing compound work together to bring surfaces to a fine finish.
• Sanding Drum Performance: The sanding drum reaches curved edges and tight areas that flat discs cannot access.
• Cutting Discs Included: Five resinoid discs handle cuts in thin metal and similar materials for maintenance and repair tasks.
• Rotary Tool Compatibility: The standard arbor shank fits the collet of most rotary tools, so no additional fittings are needed.

Specs & Attributes

• Type: Cutting, grinding and polishing rotary tool accessories
• Arbor Size: 3.17mm (1/8")
• Felt Wheel Arbor Size: 3.17mm (1/8")
• Sanding Drum Diameter: 12.6mm
• Small Felt Wheel Diameter: 13mm
• Large Felt Wheel Diameter: 25mm
• Weight: 0.16kg
• Total Pieces: 24

Typical Applications

• Cutting thin metal, bolts, or sheet material with the resinoid cutting discs
• Grinding welds and removing rust from metal surfaces
• Sanding curved or tight surfaces using the sanding drum
• Polishing metal, glass, or acrylic to a smooth finish
• Cleaning and deburring surfaces with wire or nylon brushes
• Craft and hobby work requiring fine finishing accessories

How to Use

• Select Your Accessory: Choose the right piece for the material and task at hand.

• Fit to Your Rotary Tool: Insert the accessory shank into the collet and tighten securely.

• Set the Speed: Use lower speeds for polishing and higher speeds for cutting or grinding.

• Work the Surface: Move the tool steadily without applying excessive pressure.

• Change Accessories Safely: Switch off the tool and release the collet before swapping any piece.

• Apply Polishing Compound: For a fine finish, load the compound onto a felt wheel and work the surface at a low speed.

Frequently Asked Questions (FAQs)

• What materials can rotary tool cutting and grinding accessories work on?
  Cutting wheels and grinding attachments work on a range of materials, including metal, wood, and plastic. Resinoid cutting discs suit thin metals, bolts, and sheet material. Always match the accessory type to the material for the best result.

• What is a felt polishing wheel used for on a rotary tool?
  Felt wheels buff and polish surfaces to a smooth finish at high speed. They work on metals, including brass, aluminium, and steel, as well as glass and certain plastics. Pairing a felt wheel with polishing compound gives the most consistent result.

• What is a sanding drum used for on a rotary tool?
  A sanding drum holds a cylindrical sanding band and smooths, shapes, and refines surfaces. It works well on curved edges, holes, and tight areas that flat discs cannot reach. A sanding drum works on both wood and metal surfaces.

• Will rotary tool accessories fit any rotary tool brand?
  Most standard rotary tool accessories use a 3.17mm (1/8") shank. This size fits the collet on the majority of popular rotary tool brands. Always check your tool's collet size before fitting any accessory to confirm compatibility.

• What are resinoid cutting discs, and what do they cut?
  Resinoid cutting discs use a resin bond to hold the abrasive material together. They cut metal, including bolts, screws, and sheet metal, with controlled performance. They are thinner than grinding discs and are designed for cutting rather than bulk material removal.

Summary

The Blue Spot Tools 24 Piece Rotary Tool Accessory Set covers cutting, grinding, sanding, and polishing in a single set. With 24 accessories across 13 types and a 3.17mm (1/8") arbor, it fits most standard rotary tools. The set suits craft, hobby, and general maintenance tasks.