Blue Spot Tools 48 Piece Sanding, Cutting & Grinding Rotary Tool Accessory Set 3.17mm (1/8") Arbor 19086

Blue Spot Tools 48 Piece Sanding, Cutting & Grinding Rotary Tool Accessory Set

MPN: 19086

Barcode: 5028734190861

Size: 3.17mm (1/8") Arbor

Weight: 0.15kg

Overview

This Blue Spot Tools rotary accessory set packs 48 pieces into a single kit for sanding, cutting, and grinding work. The accessories fit most rotary tools and cover common tasks from surface shaping to fine cutting.

The set includes resinoid cutting discs in two configurations, sanding bands, a sanding drum, and HSS cutters. Each accessory type handles a distinct task, making the kit suited for both cutting and surface-finishing work.

What's Included

• 32mm Double-Net Resinoid Cutting Discs: 4 pieces
• Resinoid Cutting Discs: 36 pieces
• 12.6mm Sanding Bands: 4 pieces
• 12.6mm Sanding Drum: 1 piece
• HSS Cutters: 2 pieces
• Arbor 3.17mm (1/8"): 1 piece
• Carry Case: Included for storing all accessories

Key Features and Benefits

• Standard 1/8" Arbor: The 3.17mm arbor fits the collet on most rotary tools with no adapters needed.
• Double-Net Disc Construction: Two layers of reinforcing mesh within the 32mm discs add rigidity and reduce shattering risk during cuts.
• 36 Cutting Discs Included: Ample supply to complete a project without restocking mid-task.
• HSS Cutters for Detail Work: Two high-speed steel cutters handle fine material removal where abrasive accessories would be too aggressive.
• Replaceable Sanding Bands: Bands mount to the 12.6mm drum and swap out individually when worn, keeping the drum in use for longer.

Specs & Attributes

• Weight: 0.15kg
• Arbor Size: 3.17mm (1/8")
• Number of Pieces: 48
• Compatibility: For use with most rotary tools

Typical Applications

• Sanding and shaping wood in craft and model-making projects
• Cutting thin sheet materials using resinoid cutting discs
• Surface preparation before painting or finishing
• Fine material removal with HSS cutters on wood and soft materials
• Smoothing and deburring edges after cutting
• Detail sanding in tight or hard-to-reach areas

How to Use

• Fit the Arbor: Insert the 3.17mm (1/8") arbor into your rotary tool's collet. Tighten securely before attaching any accessory.

• Select the Right Accessory: Choose the appropriate accessory for the task. Use resinoid discs for cutting, sanding bands for shaping, and HSS cutters for fine material removal.

• Attach the Accessory: Mount the chosen disc, band, or cutter to the arbor or drum as required. Follow your rotary tool manufacturer's guidance on attachment method.

• Set the Speed: Refer to your rotary tool's instruction manual for the recommended speed range for the accessory and material in use.

• Work the Surface: Move the tool steadily across the workpiece. Avoid holding the accessory in one spot, particularly with sanding bands, as this can gouge the material.

• Replace Worn Accessories: Swap out worn sanding bands or cutting discs as needed. Draw from the set's remaining stock to keep results consistent throughout the project.

Frequently Asked Questions (FAQs)

• What are resinoid cutting discs used for?
  Resinoid cutting discs are abrasive wheels bonded with a resin compound. They cut through materials such as wood, plastic, and fibreglass. The double-net versions in this set carry two layers of reinforcing mesh within the disc body, which adds rigidity during use.

• What is the difference between a sanding band and a sanding drum?
  A sanding drum is a rubber cylinder that mounts to the rotary tool. Sanding bands are abrasive sleeves that slide over the drum. The bands do the abrasive work and can be replaced individually when worn, leaving the drum intact for continued use.

• Will this accessory set fit my rotary tool?
  The set uses a 3.17mm (1/8") arbor, which is the standard shank size accepted by most rotary tools. Check your tool's collet size before use. Tools that only accept a 1/4" collet will require a separate collet adapter to use 1/8" shank accessories.

• What are HSS cutters used for in a rotary tool set?
  HSS (high-speed steel) cutters are designed for fine material removal in wood, soft plastics, and similar materials. They suit detail work where abrasive accessories would remove too much material in a single pass.

• How quickly do rotary tool cutting discs wear out?
  Resinoid cutting discs are consumable items that wear during use. The rate of wear depends on the material being cut and the pressure applied. Using light, consistent pressure and letting the disc do the work rather than forcing it through the material helps extend each disc's working life.

Summary

The Blue Spot Tools 48-piece rotary accessory kit brings sanding, cutting, and grinding capability together in one set for craft and hobby work. The kit targets craft and hobby applications and fits most rotary tools via the standard 3.17mm (1/8") arbor. With 36 resinoid cutting discs included, the set has ample capacity for multiple projects without restocking.