Blue Spot Tools 50PC Sanding, Cutting & Grinding Rotary Tool Accessory Set 3.17mm (1/8") Arbor 19084

Blue Spot Tools 50 Piece Sanding, Cutting & Grinding Rotary Tool Accessory Set

MPN: 19084

Barcode: 5028734190847

Size: 3.17mm (1/8") Arbor

Weight: 0.14kg

Overview:

The Blue Spot Tools 50 Piece rotary accessory set covers sanding, cutting, and grinding tasks across craft and hobby applications, fitting most standard rotary tools. The 3.17mm (1/8") arbor suits the standard collet size that most rotary tools accept.

The set includes 36 resinoid cutting discs and 4 double net resinoid discs for cutting work. An HSS cutter shapes wood, plastic, and soft metals, while the diamond point handles tougher materials. Six 12.6mm sanding bands and a rubber sanding drum complete the cutting and sanding range.

What's Included

• Sanding Drum: 1 Piece
• Arbor (3.17mm / 1/8"): 1 Piece
• HSS Cutter: 1 Piece
• Diamond Point: 1 Piece
• Sanding Bands (12.6mm diameter): 6 Pieces
• Double Net Resinoid Cutting Discs: 4 Pieces
• Resinoid Cutting Discs: 36 Pieces
• Carry Case: 1 Piece

Key Features and Benefits

• Three task types in one set: Covers sanding, cutting, and grinding, so you avoid switching between separate kits.
• 40 cutting discs across two types: A large supply of resinoid and double net resinoid discs means fewer interruptions during cutting sessions.
• HSS cutter for shaping work: The high-speed steel cutter routes and shapes wood, plastic, and soft metals cleanly.
• Diamond point for hard surfaces: The diamond point works on glass, stone, and ceramic tile, where standard abrasive accessories fall short.
• Drum sander for contoured surfaces: The rubber sanding drum with six sanding bands reaches curved, recessed, and internal areas that flat pads cannot access.

Specs & Attributes

• Compatibility: For use with most rotary tools
• Arbor Size: 3.17mm (1/8")
• Weight: 0.14kg
• Number of Pieces: 50

Typical Applications

• Cutting metal rods, bolts, and soft metal pipe with resinoid cutting discs
• Shaping and routing wood or plastic components using the HSS cutter
• Working hard surfaces such as glass, stone, and ceramic tile with the diamond point
• Sanding curved surfaces, edges, and internal recesses using the drum and bands
• Removing burrs and rough spots from cut metal parts
• Craft and model work requiring controlled material removal

How to Use

• Choose your accessory: Pick the correct piece for the task. Use a cutting disc for slicing, a sanding band for smoothing, or the diamond point for hard materials.

• Fit the arbor: Insert the 3.17mm (1/8") arbor into the rotary tool's collet and tighten it securely.

• Attach the accessory: Mount the chosen disc or band onto the arbor following your rotary tool manufacturer's guidance.

• Set the speed: Adjust the tool speed to suit the material. Use lower speeds for softer materials and higher speeds for harder surfaces.

• Work in passes: Apply light, steady pressure and move in short, controlled passes. Do not force the accessory into the material.

Frequently Asked Questions (FAQs)

• What materials can resinoid cutting discs cut?
  Resinoid cutting discs cut metals, including bolts, screws, and soft metal pipe. Double net resinoid discs carry a reinforcing mesh layer that adds strength for more demanding cuts.

• What is a diamond point used for on a rotary tool?
  A diamond point cuts, shapes, and grinds hard surfaces that standard abrasives cannot handle well. Common uses include working on glass, ceramic tile, stone, and similar hard materials.

• What does an HSS cutter do on a rotary tool?
  An HSS (high-speed steel) cutter shapes, routes, and carves materials such as wood, plastics, and softer metals. The steel construction holds a working edge well during use.

• What is a sanding drum and sanding band used for?
  A sanding drum holds a cylindrical abrasive sleeve - the sanding band - to sand curved, contoured, or recessed surfaces. When a band wears out, it slides off the drum, and you fit a fresh one.

• Are rotary tool accessories universal between brands?
  Rotary tool accessories are not universal. Compatibility depends on shank size and collet size. The 3.17mm (1/8") shank in this set fits the collet size used by most rotary tools. Always confirm your tool's collet spec before fitting accessories.

Summary

The Blue Spot Tools 50 Piece rotary accessory set (19084) covers craft and hobby sanding, cutting, and grinding. Forty cutting discs, an HSS cutter, a diamond point, and a sanding drum with bands are all included.