Toupret Skim-Flex TX140 Skim-Coat Int Ext 5kg Tub Ready Mixed TTTX14005GB

Toupret Skim-Flex TX140 Ready Mixed Flexible Skimcoat Filler - Interior & Exterior 5kg Tub

MPN: TTTX14005GB

Barcode: 3178310018972

Weight: 5kg

Colour: White (when dry)

Overview:

Toupret Skim-Flex TX140 is a ready-mixed flexible skimcoat filler for covering and levelling all types of substrates, inside and out. It stays flexible once dry, making it well-suited for surfaces prone to movement and reappearing cracks.

The formula bonds to a wide range of substrates - including tiles, ceramics, plasterboard, concrete, and brick. Coverage is 1.6kg per m² at 1mm depth, with application up to 5mm thick.

The breathable formula performs well in damp conditions, making it a strong option for kitchens and bathrooms. Apply at temperatures between 5°C and 35°C, at no more than 80% relative humidity.

Key Features and Benefits

• Ready mixed: No mixing needed - use straight from the tub.
• Stays flexible when dry: Reduces re-cracking on moving or flexible substrates.
• Strong adhesion: Bonds to tiles, ceramics, glass tiles, and other difficult surfaces (adhesion >0.8 MPa per EN 16-566).
• Interior and exterior use: Suitable for a wide range of applications across both settings.
• Damp-area rated: Breathable formula performs well in kitchens and bathrooms.
• Application thickness: Fills up to 5mm deep in a single coat.
• Coverage: 1.6kg covers 1m² at 1mm depth.
• Fast overcoat time: Can be painted over in 24-48 hours once fully dry.
• Easy to spread and sand: Effortless application and finishing with standard tools.
• Very low VOC: VOC content below 0.01%.
• IAQ classification: C (Indoor Air Quality).
• Conforms to: BS EN 16566:2014.
• Product guarantee: 12 months from purchase, stored in original packaging and away from moisture and humidity.

Typical Applications

• Skimcoating directly over tiles and ceramics without removing them.
• Treating reappearing cracks on moving or flexible surfaces.
• Finishing walls and ceilings in kitchens and bathrooms.
• Levelling and covering plasterboard, concrete, brick, and breeze block.
• Overcoating polystyrene, cork, or glass tiles.
• Surface preparation prior to painting or applying wall coverings.
• Light filling up to 5mm on problem or uneven substrates.
• Skimming over old painted or previously filled surfaces.

How to Use

• Prepare the surface: The surface must be hard, cohesive, clean, sound, and dry. Follow current trade practices for surface preparation.

• Apply the filler: Use a filling knife, trowel, or coating blade to apply directly from the tub. Work to the required thickness, up to a maximum of 5mm.

• Apply additional coats: Wait until the previous coat is hard and dry to the touch before applying the next coat.

• Allow to dry: Leave for 24-48 hours on average before overpainting. Drying times vary depending on substrate type, coat thickness, and ambient conditions.

• Sand to finish: Once fully dry, sand to a smooth finish. Always wear a P2 dust mask when sanding.

• Clean tools: Dry residue rubs off tools without water once set. Water cleaning is also suitable immediately after use.

Frequently Asked Questions (FAQs)

• Can Skim-Flex TX140 be applied directly over tiles?
  Yes. It bonds directly to tiles, ceramics, and glass tiles without the need for removal. The surface must be clean, sound, and dry before application begins.

• How long before Skim-Flex TX140 can be painted over?
  Allow 24-48 hours on average before applying paint or a wall covering. The actual time will vary depending on coat thickness, substrate type, and the temperature and humidity at the time of application.

• How thick can a single coat of Skim-Flex TX140 be?
  A single coat can be applied up to 5mm thick. For a fine skim finish, around 1mm is the typical recommended thickness. Thicker coats will take longer to dry fully before overcoating.

• Is Skim-Flex TX140 suitable for use in kitchens and bathrooms?
  Yes. The breathable, damp-tolerant formula makes it well-suited for use in kitchens and bathrooms. Do not apply below 5°C, above 35°C, or at relative humidity above 80%.

• What paints and wall coverings can be applied over Skim-Flex TX140?
  Most standard indoor and outdoor paints and wall coverings can go over it once fully dry. Mineral paints are not recommended. If in doubt, check with the coating manufacturer before proceeding.

Summary

Toupret Skim-Flex TX140 is a ready-mixed flexible skimcoat filler that bonds to a wide range of substrates - from tiles and plasterboard to concrete and brick. It stays flexible once dry, making it a useful option for surfaces prone to movement or reappearing cracks. Available in a 5kg tub, it is suitable for interior and exterior use and accepts paint within 24-48 hours.

"Always read the Toupret Skim-Flex TX140 Skim-Coat Int Ext Technical Datasheet prior to first use to make sure that you have the correct information and product for your application."