ForgeFix Lightning Concrete Masonry Torx Screw Bolt M6 50mm 100pk LGB650T

ForgeFix Lightning Torx Screw Bolt M6 x 50mm

MPN FORLGB650T

Option LGB650T

Barcode 5028485101574

Forgefix M6 50mm Torx head grey Elementech 1000 lightning bolt screw is totally removable and cuts its own thread in masonry and concrete, simply pilot dill with the recommended drill bit and wind the bolt home.

The bolts Elementech coating gives superior anti-corrosion, which has been salt spray tested to 1,000 hours.

Ideal for either temporary or permanent anchoring into base materials including brick, concrete, hollow brick or block work.

Flange head acts as a fixed washer, distributing the load under the bolt head.

The lightning bolt is particularly well suited for close to edge or fixing, as it does not expand and burst the surrounding base material.

It is through fixing, eliminating the need for marking and re-positioning.

Simply drill through fixture and into the base and simply screw and tighten.

Lightning Bolt Demonstration Video

Widely used for fixing batons, balustrades, handrails, racking and holding down machinery, window and door fitting plus many more installation applications.

Ensure the correct Torx drive insert bit is used for best installation results.

By design, TORX head screws resist cam-out much better than Phillips or Slotted screws.

TORX head sizes are described using the capital letter T, followed by a number.

A smaller number corresponds to a smaller point-to-point dimension of the screw head.

Only the proper driver can drive a specific head size without risk of ruining the driver or screw.

Specification and Main Points 

• Medium to heavy-duty, thread forming anchor
• Offers excellent resistance to corrosion
• Head - Countersunk torx
• Size - M6 x 50mm 
• Maximum fastening - 20mm
• Colour - Grey 
• Quantity - Box of 100 

Take a Look at The Full Range of Torx Head Masonry Screws