Blue Spot Tools Electralight COB Work Light With Batteries 65279 Bluespot

Electralight COB Work Light With Batteries (4.5cm x 4cm x 21cm)

MPN: 65279

Barcode: 5028734652796

Size: 21cm x 4.5cm x 4cm

Weight: 0.15kg

Overview:

The Electralight COB Work Light delivers 150 lumens of broad, even illumination for garages, workshops, and warehouses. A built-in 7-LED torch adds 20 lumens of focused, directional light when you need it.

The rear high-strength magnet attaches to any magnetic metal surface in seconds. A built-in hanging hook provides overhead positioning without a stand or bracket. Both the COB panel and the LED torch operate independently or together. Three AA batteries come included, so the light is ready to use straight away.

Key Features and Benefits

• Switch between the COB panel and torch independently, or run both together for maximum coverage
• The wide COB panel floods large surfaces with even, shadow-free light - no hot spots
• The 7-LED beam focuses light precisely where needed for close-up or directed tasks
• High-strength rear magnet attaches to steel shelving, vehicle panels, or any magnetic surface
• Hanging hook lets you suspend the light overhead, freeing both hands for the job
• No mains power needed - battery-powered for use anywhere on site or at home
• Arrives battery-ready - no separate purchase required before you start work
• Compact enough to fit in a tool bag or jacket pocket
• Lightweight build makes it easy to carry between work areas
• Suits trade and home use across garages, workshops, warehouses, and site work

Specs & Attributes

• COB Brightness: 150 Lumens
• Torch Brightness: 20 Lumens
• Torch LEDs: 7
• Battery Type: AA x3 (included)
• Weight: 0.15kg
• Height: 21cm
• Width: 4.5cm
• Depth: 4cm

Typical Applications

• Under-bonnet vehicle inspections in the garage
• Workshop bench and floor lighting
• Warehouse stock checking and picking
• Plumbing or electrical work in dark or confined spaces
• Loft and underfloor inspections
• Camping and outdoor use in covered, dry areas
• Emergency lighting at home during a power cut
• Site inspections on construction or maintenance projects

How to Use

• Load the batteries: Open the rear battery compartment and insert 3 x AA batteries as indicated.

• Activate the COB light: Press the COB button to switch on the wide-angle work light panel.

• Activate the torch: Press the torch button to switch on the 7-LED directional beam.

• Mount magnetically: Press the rear of the unit against any magnetic metal surface to hold it in place.

• Hang overhead: Loop the hanging hook over a beam, rail, or fixture to position the light above the work area.

• Switch off: Press the relevant button to turn off the COB light, the torch, or both when finished.

Frequently Asked Questions (FAQs)

• What does COB stand for in a work light?
  COB stands for Chip on Board. Multiple LED chips are mounted directly onto a single substrate, producing a wide, even beam from a compact panel rather than separate point sources.

• What is the difference between a COB work light and an LED torch?
  A COB panel produces a broad, diffused beam that covers a large area evenly. An LED torch delivers a narrower, more directed beam suited to focusing on a specific point or small area.

• Is a COB work light suitable for outdoor use?
  Without a stated IP (Ingress Protection) rating, this type of work light is best suited to dry indoor or covered locations. Using it in wet or damp conditions risks damage to the unit and can create a safety hazard.

• How do I clean a COB work light?
  Wipe the lens and housing with a dry or lightly damp cloth. Never submerge the unit in water and avoid solvent-based cleaners, which can damage the housing.

• How long do the batteries last in a COB work light?
  Battery life depends on which mode you run and for how long. Using the COB panel and torch together will drain the AA batteries faster than running one mode at a time. Switching off the mode you are not actively using extends run time between battery changes.

Summary

The Electralight COB Work Light and Torch from Blue Spot Tools gives you two lighting modes in one compact, portable unit. The COB panel lights up broad work areas while the 7-LED beam handles close-up or directed tasks. With magnet mounting, a hanging hook, and batteries included, it is ready to use straight away.