Blue Spot Tools Electralight 100 Lumen SMD Mini Work Light And Torch 65202 Bluespot

Electralight 100 Lumen SMD Mini Work Light And Torch, With Batteries

MPN: 65202

Barcode: 5028734652024

Weight: 0.08kg

Overview:

This compact work light and torch delivers two light sources in one pocket-sized unit. The 20 SMD front panel outputs 100 lumens for broad task lighting, while the 3 LED top light provides 5 lumens as a directed torch beam.

The head rotates on a full 360° axis, letting you aim the light exactly where the job needs it. A hanging hook on the rear and a high-strength magnet on the base both free up your hands when working in confined or awkward spaces.

Three AAA batteries come included, so the light is ready to use straight away. Its small footprint makes it easy to carry in a tool bag, pocket, or glove box.

Key Features and Benefits

• Dual light modes: Switch between a broad 100-lumen work light and a focused 5-lumen torch beam
• 360° adjustable head: Rotate and lock the light at any angle to suit the task
• Hands-free magnetic base: Sticks firmly to steel and other ferrous surfaces, leaving both hands free
• Rear hanging hook: Suspend the light from a shelf, bracket, or railing without a magnetic surface
• Pocket-sized build: Fits easily in a tool bag, jacket pocket, or vehicle glove box
• Batteries included: Ready to use straight out of the box - no separate purchase needed

Specs & Attributes

• Front Light Output: 100 lumens
• Front Light Source: 20 SMD LEDs
• Top Light Output: 5 lumens
• Top Light Source: 3 LEDs
• Head Rotation: 360°
• Battery: 3 x AAA (included)
• Weight: 0.08kg
• Dimensions: 10cm x 7cm x 3cm

Typical Applications

• Under-sink or cabinet plumbing inspections
• Automotive engine bay checks and minor repairs
• Electrical work in consumer units or junction boxes
• Loft, crawl space, and underfloor inspections
• Emergency lighting during power cuts at home
• Workshop bench tasks calling for a hands-free light source
• Glove box or tool bag, standby torch for site use

How to Use

• Insert the batteries: Open the battery compartment and fit the 3 included AAA batteries, following the polarity markings inside.

• Choose your light: Switch between the 100-lumen SMD front panel or the 5-lumen LED top torch depending on the task.

• Adjust the angle: Rotate the head on its 360° axis to direct the beam at the working area.

• Mount with the magnet: Press the base firmly onto any clean, flat ferrous surface to hold the light hands-free.

• Hang with the hook: Loop the rear hook over a nail, bracket, or railing when a magnetic surface is not available.

Frequently Asked Questions (FAQs)

• What does SMD mean in a work light?
  SMD stands for Surface Mount Device. SMD LEDs mount directly onto a printed circuit board rather than using a bulb housing, which allows more LEDs to fit into a smaller area. This produces a wider, more even spread of light compared to a single-point source.

• How bright is 100 lumens for a work light?
  100 lumens gives adequate light for close-up tasks in confined spaces such as under sinks, inside cupboards, or within engine bays. It suits inspection and detail work rather than lighting a large open room. Higher-output lights in the 500–1000 lumen range are better suited to wide-area workshop lighting.

• What is the difference between a work light and a torch?
  A torch projects a focused beam forward for distance visibility. A work light spreads light over a wider area to illuminate a workspace rather than a single point. Many compact units, like this one, combine both modes in a single housing.

• How long do AAA batteries last in a small LED work light?
  Battery life varies with output level and battery brand. As a general guide, fresh alkaline AAA batteries in a 100-lumen LED light typically last between 4 and 8 hours of continuous use. Switching to the lower 5-lumen mode extends runtime considerably.

• Does a magnetic base work on all metal surfaces?
  Magnetic bases only attract to ferrous metals, primarily steel and iron. They do not attach to aluminium, copper, brass, or stainless steel. Always check that the mounting surface is ferrous before relying on the magnet for hands-free use at height.

Summary

The Electralight 100 Lumen SMD Mini Work Light and Torch is a compact, battery-operated light built for hands-free use in tight spaces. With a 100-lumen SMD front panel, a 5-lumen LED top torch, full 360° head rotation, a strong magnetic base, and a rear hanging hook, it covers a wide range of lighting tasks on site or at home.