Bond It Path Patio Seal Solvent Free Slab & Block Paving Sealer 5 litre

Bond It Drive Alive Block Paving Path Patio Seal Slab Solvent Free Clear Low Sheen Sealer

Size 5 litre 

MPN BDH061

Barcode 5060021363954

Bond it Patio Seal Sealer is a solvent free acrylic coating used to seal and protect patios, paths, natural stone, concrete and block paving from the effects of the sunlight, water, oil, petrol and fungal moss growth.

Bond it Patio Seal Protects block paving driveways and pathways and patios against water penetration as well as spillages of contaminants, such as oil and grease.

It will also deter dirt and grime build-up and will enhance both the present colour of the paths and greatly extend the lifespan of the driveway block paving, path or patio slabs.

The milky solution dries to hard wearing water repellent film which gives a low sheen slip resistant finish which will reduce dirt pick up and facilitate easier cleaning.

The product is safer to use than conventional solvent based products, i.e. it is non flammable and will not harm plants and animals when used as directed.

Bond it Patio Seal Benefits

• Solvent free formulation non-flammable, low odour.
• Improves appearance of dull paths and stone.
• Also acts as a dust proofer and facilitates easier cleaning.
• Dramatically improves water and mar resistance.
• Improves water resistance and UV resistance
• Retards mould growth
• Facilitates easier cleaning
• Protects from sunlight, water, oil, petrol and fungal growth.

Application Kits Available 9 inch Single Arm Application Kit or 12 inch Double Arm Application Kit

Areas For Use

Seals and protects, block paving, paths, patios, natural stone, concrete from the effects of the sunlight, water, oil, petrol fungal and moss growth.

Preparation

Remove organic growth lichens etc. that may be present.

For best results pre treat the areas with Bond It PATIO BLASTER refer to data sheet.

Wash all debris away and ensure the surface is dry and free from oil, grease, dust and loose material that may hinder adhesion.

Application

Bond It PATIO SEAL is ready to use and should not be diluted.

We advise that you test this product on a small inconspicuous area prior to use to check compatibility.

Shake well before use to thoroughly mix the contents.

Ensure that the surface is completely dry before application.

Apply a single coat using either a brush, roller or squeegee ensuring no pooling or ponding occurs.

Allow 3 to 4 hours drying time depending on atmospheric conditions before trafficking the area.

Application temperature should be between 5 degrees C and 30 degrees C.

Colder humid conditions will slow drying times.

Important Note

PATIO SEAL dries clear but over application and ponding or using on damp surfaces can lead to white discolouration ensure the surface is fully dry.

It is necessary to seal paviours prior to the application of any pointing or jointing compound as some compounds have the capability of staining porous paving materials.

Do not apply Bond It PATIO SEAL to wet surfaces or in conditions of high humidity.

Do not use when rain is forecast protect from rain until dry.

Do not apply to non-porous surfaces.

Keep children and pets away from treated areas until fully dry.

Also Available in Trade size Bond It Patio Seal 25 litre