Blue Spot Tools Ironmongery 152mm Zinc Plated Tower Bolt 78007

Blue Spot Tools Ironmongery 152mm Zinc Plated Tower Bolt

MPN: 78007

Barcode: 5028734780079

Weight: 0.23kg

Overview:

This 152mm tower bolt from Blue Spot Tools is made from carbon steel with a zinc plated finish for outdoor use on timber gates and doors. It suits taller gate openings, double gate setups, and heavier outbuilding doors where a longer bolt throw is required.

All fixing hardware comes included. A 5 year manufacturer guarantee covers the product from the date of purchase.

Key Features and Benefits

• Carbon Steel Construction: Provides a strong base for a 152mm outdoor sliding bolt.
• Zinc Plated Finish: Protects the steel against moisture and outdoor weathering.
• 152mm Bolt Length: Suited to taller gate openings and heavier timber doors needing more bolt engagement.
• Fittings Included: All fixing hardware is supplied - no additional purchases required.
• 5 Year Guarantee: Covered by a manufacturer guarantee.

Specs & Attributes

• Bolt Length: 152mm
• Material: Carbon steel
• Finish: Zinc plated
• Weight: 0.23kg

Typical Applications

• Securing tall timber garden gates
• Fastening double gate closures
• Locking workshop or garage side access doors
• Fitting to heavy outbuilding doors
• Securing large shed doors
• General outdoor ironmongery on heavier timber

How to Use

• Choose the Position: On taller gates, position the bolt at a reachable height. Mark the screw positions with a pencil before drilling.

• Drill Pilot Holes: Use a bit slightly smaller than the fixing screws. Clean pilot holes prevent the timber from splitting when the screws are driven in.

• Fit the Bolt Body: Align the bolt with the pilot holes and drive all screws home firmly so the body sits flat against the gate.

• Mark the Keeper: Extend the bolt fully and mark the keeper position on the post or frame directly opposite the bolt barrel.

• Test Before Final Tightening: Fit the keeper loosely first. Check the bolt slides freely, then fully tighten once the action is confirmed. On longer bolts, precise keeper alignment is important to avoid binding.

Frequently Asked Questions (FAQs)

• What size tower bolt works best on a double gate?
  Double gates typically need a bolt on each leaf. For taller or heavier double gates, a 152mm or longer bolt provides a more positive keeper engagement and better tolerates minor timber movement over time.

• How do I fit a tower bolt on a gate that has warped or twisted?
  Fit the bolt body first, then hold the gate in the closed position and mark the keeper location. If the warp creates a gap between bolt and post, use packing pieces behind the keeper to bring it into alignment.

• Can tower bolts be fitted to PVC or composite gate frames?
  They can, but you need to check the material is thick and solid enough to hold the fixing screws. For hollow sections, use cavity fixings rather than standard wood screws.

• Is one bolt at the top of a tall gate enough, or should I fit one at the bottom too?
  For tall or heavily loaded gates, fitting bolts at both top and bottom is better practice. A bottom bolt limits flex across the gate's full height and keeps both edges secure in windy conditions.

• Do zinc plated tower bolts need maintenance?
  They benefit from a periodic check - inspect the slide action once or twice a year. A small amount of dry lubricant keeps the bolt moving freely, and checking that fixing screws remain tight prevents movement of the body over time.

Summary

The Blue Spot Tools 152mm zinc plated tower bolt suits taller garden gates, double gate setups, and heavier outbuilding doors. Carbon steel with a zinc plated finish, fixing hardware included, and covered by a 5 year manufacturer guarantee.