ForgeFix Lightning Torx Screw Bolt M6 x 75mm Pack of 10
MPN FORLGB675TM
Option 10LGB675T
Barcode 5028485115373
Forgefix M6 75mm Pack of Torx Head Grey Elementech 1000 Lightning Bolt screw is totally removable and cuts its own thread in masonry and concrete, simply pilot drill with the recommended drill bit and wind the bolt home.
The bolts Elementech coating gives superior anti-corrosion, which has been salt spray tested to 1,000 hours.
Medium to heavy-duty, thread forming anchor.
Ideal for either temporary or permanent anchoring into base materials including brick, concrete, hollow brick or block work.
Flange head acts as a fixed washer, distributing the load under the bolt head.
The Lightning Bolt is particularly well suited for close to edge or fixing, as it does not expand and burst the surrounding base material.
It is through fixing, eliminating the need for marking and re-positioning.
Simply drill through fixture and into the base and simply screw and tighten.
Lightning Bolt Demonstration Video:
Widely used for fixing batons, balustrades, handrails, racking and holding down machinery,
Window & Door Fitting plus many more installation applications.
Ensure the correct Torx drive insert bit is used for best installation results.
Offers excellent resistance to corrosion.
By design, TORX head screws resist cam-out much better than Phillips or Slotted screws.
TORX head sizes are described using the capital letter T, followed by a number.
A smaller number corresponds to a smaller point-to-point dimension of the screw head.
Only the proper driver can drive a specific head size without risk of ruining the driver or screw.
Specification and Main Points
Data | |
Manufacturer | Forgefix Lightening bolt |
Reference Code | 10LGB675T, FORLGB675TM |
Size | M6 x 75mm |
Length | 75mm |
Quantity | Pack of 10 |
Colour | Grey |