Toupret Plasterboard Paper Metal Joint Corner Tape 51mm 30m FGCT0530GB

Toupret Plasterboard Paper Metal Joint Corner Tape 51mm x 30m FGCT0530GB

MPN: FGCT0530GB

Barcode: 3178310022535

Size: 51mm x 30m

Colour: Off-white

Overview:

Toupret Plasterboard Metal Corner Tape is a paper jointing tape reinforced with two electro-galvanised, corrosion-resistant steel strips. It is designed for finishing internal and external corners on plasterboard. The tape meets BS EN 13963:2014 and NF EN 13963:2014 standards for jointing materials for gypsum boards.

Each roll measures 51mm wide and 30m long, with a thickness of 0.28mm and a paper weight of 138g/m². A central groove runs the full length of the tape, making it easy to fold neatly along a corner without creasing or tearing.

The tape is compatible with any tapered or butted plasterboard. Once embedded, it can be overcoated with any filler, paint, or wall covering. It is suitable for both interior and exterior use, and is recommended for use alongside Toupret Joint Filler.

Key Features and Benefits

• Central groove: Runs the full length for clean, consistent folding along corners.
• Metal reinforcement: Two electro-galvanised steel strips resist bending and hold the corner shape firmly.
• Corrosion resistant: Steel strips tested to a minimum of 48 hours at stage 4 (AFNOR X41002 Film A91020).
• Paper construction: High-quality paper at 138g/m² with a 0.28mm thickness for a flat, workable finish.
• Off-white colour: Blends naturally with plasterboard surfaces beneath fillers and coatings.
• Interior and exterior use: Rated for both internal and external plasterboard corners.
• High compatibility: Overcoatable with any filler, paint, or wall covering.
• Standards compliant: Conforms to BS EN 13963:2014 and NF EN 13963:2014.
• Wide roll format: 51mm width provides adequate coverage across both sides of a corner in one application.
• 30m roll length: Covers a generous run of corners from a single roll.

Typical Applications

• Finishing internal corners on plasterboard walls and ceilings.
• Reinforcing external corners in drywall and stud partition construction.
• Jointing tapered-edge plasterboard at corners.
• Jointing butted plasterboard edges at corners.
• Use in new-build drylining projects requiring corner reinforcement.
• Renovation and refit work where plasterboard corners need a clean, reinforced finish.

How to Use

• Prepare the surface: Remove all loose, friable, or non-adherent material from the corner. The substrate must be hard, clean, sound, and dry.

• Apply joint filler: Cut the tape to the required length. Apply Toupret Joint Filler to a depth of approximately 3mm, covering both sides of the corner at the same time.

• Embed the tape: Fold the tape along the central groove with the metal strips facing the wall. Press it firmly into the wet filler, then remove any excess filler. Leave to dry fully.

• Sand between coats: Once the first coat is completely dry, lightly sand the surface to remove any high spots or ridges.

• Apply the finishing coat: Apply a finishing coat of filler, feathering it out at least 100mm beyond the first coat on each side. Leave to dry, then lightly sand repeatedly if needed before overcoating.

Frequently Asked Questions (FAQs)

• What is metal corner tape used for in plasterboard jointing?
  Metal corner tape reinforces the joints at internal and external plasterboard corners. The steel strips within the tape prevent the corner from cracking or deforming once jointed and finished.

• Can Toupret Metal Corner Tape be used on external corners?
  Yes. The tape is rated for both internal and external plasterboard corners, making it appropriate for both angle types in drywall construction.

• Which filler should I use with this corner tape?
  Toupret recommends using their Joint Filler alongside this tape. However, it can also be overcoated with any compatible filler once embedded and dry.

• What plasterboard types is this tape compatible with?
  The tape can be applied to any tapered or butted plasterboard, covering the most common board types used in drywall and stud partition systems.

• What temperature conditions are required during application?
  Apply only when the temperature is between 5°C and 35°C, and when relative humidity does not exceed 80%. Conditions outside this range may affect adhesion and drying.

Summary

Toupret Metal Corner Tape is a (51mm x 30m) paper tape reinforced with electro-galvanised steel strips, built to finish internal and external plasterboard corners to a professional standard. Conforming to BS EN 13963:2014, it is suitable for use across tapered and butted plasterboard on both interior and exterior applications. A central groove allows straightforward folding, and the finished joint can be overcoated with any filler, paint, or wall covering.

"Always read the Toupret Plasterboard Metal Corner Tape 51mm x 30m Technical Datasheet prior to first use to make sure that you have the correct information and product for your application."