Toupret Plasterboard Paper Joint Tape 50mm x 150m FGPT05150GB

Toupret Plasterboard Paper Joint Tape 50mm x 150m

MPN: FGPT05150GB

Barcode: 3178310022528

Size: 50mm x 150m

Colour: Off White

Overview:

The Toupret Plasterboard Paper Joint Tape (50mm x 150m) is a professional paper tape for jointing plasterboard on interior walls and ceilings. At 50mm wide and 150m long, it is compatible with automatic taping machines. The tape is designed for use with Toupret Joint Filler and can be overcoated with any type of filler, paint, or wall covering once dry.

The tape features a centre fold and micro perforations at a rate of 200 to 600 holes per metre. This construction promotes better adhesion into wet jointing compound and gives the tape an absorption level comparable to plasterboard itself. It also resists bending during application for a cleaner, more controlled result.

Tested in accordance with BS EN 13963:2014, the tape achieves a breakage resistance of greater than 4N/mm. Dimensional stability is below 0.4% in the engine direction and below 2.5% in the cross direction. These figures confirm constant performance across standard plasterboard jointing conditions.

Key Features and Benefits

• Micro perforations: 200 to 600 holes per metre for improved grip and adhesion into jointing compound.
• Centre fold: Allows accurate placement along the centre of any plasterboard joint.
• Absorption: Comparable to plasterboard for a consistent, uniform finish across the joint.
• Bending resistance: The tape holds its form during application, decreasing the risk of creasing or lifting.
• Breakage resistance: Greater than 4N/mm, tested to BS EN 13963:2014.
• Dimensional stability: Less than 0.4% in the engine direction and less than 2.5% in the cross direction.
• Automatic taper compatibility: The 50mm x 150m format works with standard automatic taping machines.
• Thickness: 0.215mm for a low-profile joint that minimises visible build-up.
• Grammage: 138g/m² for a consistent paper weight throughout the roll.
• Overcoatable: Compatible with any filler, paint, or wall covering applied after drying.
• Off-white colour: Blends naturally with plasterboard and jointing compounds.
• Made in France: Manufactured by Toupret, who has been producing specialist fillers since 1938.

Typical Applications

• Jointing tapered-edge plasterboard on interior walls and ceilings.
• Jointing butt-edge plasterboard where boards meet without a recess.
• Finishing plasterboard joints before painting or decorating.
• Use with Toupret Joint Filler as part of a complete interior drylining system.
• Plasterboard installations using automatic taping machines on larger projects.
• Reinforcing joints and seams on interior drylining and partition wall systems.
• Sealing board-to-board joints before applying a top coat of filler or plaster skim.

How to Use

• Preparation: Remove all loose or friable material from the plasterboard surface. Substrates must be hard, clean, sound, and dry before application begins.

• Apply joint filler: Cut the tape to the required length. Apply Toupret Joint Filler to the joint at a depth of around 3mm, covering both sides of the joint at the same time.

• Apply the tape: Place the tape centrally over the joint. The external fold line must face into the wet compound to get the best adhesion. Press firmly into the filler using a filling or taping knife.

• Remove excess filler: Smooth away any excess compound that has been pushed out from beneath the tape. Leave the first coat to dry fully before proceeding.

• Sand and apply the finishing coat: Once dry, lightly sand the surface with an appropriate grade of sandpaper. Apply the finishing coat and feather it out at least 100mm beyond each side of the joint. Leave to dry, then lightly sand once again if needed.

Frequently Asked Questions (FAQs)

• What filler should I use with Toupret paper joint tape?
  Toupret Joint Filler is the recommended product for embedding the tape. Any compatible jointing compound or filler can then be used for the finishing coat.

• Is Toupret paper joint tape compatible with automatic taping machines?
  Yes. The 50mm x 150m roll format is compatible with standard automatic taping machines used in professional drylining work.

• What standard is this joint tape tested to?
  The tape is tested in accordance with BS EN 13963:2014, which covers jointing materials for gypsum boards. It achieves a breakage resistance of greater than 4N/mm.

• What temperature and humidity conditions are needed for application?
  Apply at temperatures between 5°C and 35°C. The relative humidity must not exceed 80% during application and drying.

• Can I paint directly over the tape once it is dry?
  Yes. Once the jointing compound is fully dry and lightly sanded, the joint can be overcoated with paint, any type of filler, or a wall covering of your choice.

Summary

The Toupret Plasterboard Paper Joint Tape is a professional paper jointing tape for interior plasterboard installations. Its 50mm x 150m format, micro-perforated centre fold design, and compliance with BS EN 13963:2014 make it well-suited to both hand and machine-applied jointing systems. Used alongside Toupret Joint Filler, it provides a strong, stable joint that accepts any filler, paint, or wall covering as a finish.

"Always read the Toupret Plasterboard Paper Joint Tape 50mm x 150m Technical Datasheet prior to first use to make sure that you have the correct information and product for your application."