Toupret Airless Spray Jointing Plaster 25kg Bag TTAIRJ25GB 40 Bag Pallet

Toupret Airless Spray Jointing Plaster 25kg Bag - TTAIRJ25GB - 40 Bag Pallet

MPN: TTAIRJ25GB

Barcode: 3178310021156

Pack Size: 40 x 25kg bags (1000kg pallet)

Weight: 25kg per bag

Overview:

Toupret Airless Spray Jointing Plaster (40 x 25kg bag). It is a ready-to-use spray plaster for interior jointing and skimming of plasterboard, suited to high-volume commercial and trade projects. The formula combines mineral components and synthetic resin, delivering a fine, smooth result with no mixing required. It works with any airless spray machine with a minimum flow rate of 5L/min.

Apply at up to 5mm per coat, with a coverage rate of 1.7kg/m²/mm. Once the first coat is dry to the touch, a second coat can be applied straight away. The surface is ready for painting in 24 to 48 hours after it is completely dry.

This spray plaster holds both UKCA and CE certification for jointing and conforms to BS EN 16566 and BS EN 13963. No priming or sealing is needed before application, and it can be overcoated with all types of fillers, paints, and wall coverings.

Key Features and Benefits

• Full Pallet Quantity: Supplied as 40 x 25kg bags on a single pallet - 1000kg total - for large-scale or ongoing projects.
• Ready to Use: No mixing required - load directly into your machine and apply.
• Fine Finish: Produces a smooth, even surface suitable for painting or wall coverings.
• Smooth Glide: Formulated for consistent flow through airless spray machines.
• Easy to Sand: Sands back cleanly once fully dry without excessive effort.
• UKCA and CE Certified: Certified for jointing in line with current UK and European standards.
• No Primer Needed: Applies directly to unpainted or previously painted substrates.
• High Coverage: A coverage rate of 1.7kg/m²/mm across 1000kg of product suits extensive interior programmes.
• Maximum Application Thickness: Apply up to 5mm per coat for greater build in a single pass.
• Broad Substrate Compatibility: Suitable for gypsum, plasterboard, cement, concrete, and cellular concrete.
• Overcoat in 24-48 Hours: Paint or apply wall coverings once the product is completely dry.
• 12-Month Guarantee: Each bag is guaranteed for 12 months from purchase when stored correctly.

Typical Applications

• Large-Scale Interior Projects: High-volume machine application across multi-room or multi-floor commercial interiors.
• Plasterboard Jointing: Filling and finishing joints between plasterboard and drywall panels.
• Interior Skimming: Skim coating plasterboard surfaces to a smooth finish before decoration.
• New Build Plastering: Spraying onto new gypsum and plasterboard substrates in residential and commercial interiors.
• Renovation Work: Applying over old painted substrates during interior refurbishment projects.
• Concrete and Cement Surfaces: Jointing and skimming over cement, concrete, and cellular concrete backgrounds.
• Pre-Decoration Preparation: Surface preparation before applying paint or wall coverings at scale.

How to Use

• Preparation: Remove all gun filters - strainer, suction, and pencil - to allow the product to flow. Load the spray plaster into your bucket or hopper and prime the airless machine with water.

• Nozzle Selection: Use nozzles in the 3.31 to 6.35 range. The machine must have a minimum flow rate of 5L/min. Check the packaging or technical datasheet for the recommended nozzle for your machine.

• Application: Stand at right angles to the wall at a distance of 0.7 to 1m. Spray at a constant 90° angle, working 1m² at a time. Move the gun parallel to the substrate at a steady speed. Proceed in cross passes, overlapping each previous pass by 50%.

• Skimming: After spraying, skim with a blade or trowel at least 50cm long to flatten the surface. Spray ceilings first before moving to walls if both are being treated.

• Second Coat and Drying: Apply a second coat as soon as the first is hard and dry to the touch. Wait until the surface is completely dry before sanding. The surface is ready to paint after 24 to 48 hours.

Frequently Asked Questions (FAQs)

• How many bags are on the pallet and what is the total weight?
  This pallet contains 40 x 25kg bags, giving a total weight of 1000kg. It is intended for trade and commercial buyers working on large-scale interior projects where continuous supply is needed on-site.

• What surfaces can Toupret Airless Spray Jointing Plaster be applied to?
  It can be applied to gypsum, plasterboard and drywall, old painted substrates, cement, concrete, and cellular concrete. No priming or sealing is required beforehand. Do not apply to polystyrene, wallpaper, damp substrates, or exterior surfaces.

• Does airless jointing plaster need to be mixed before use?
  No. This product is ready to use straight from the bag. Load it directly into your bucket or hopper and prime the machine. No water or additives need to be mixed in.

• How long does it take to dry before painting?
  The surface is ready to paint in 24 to 48 hours on average after it is completely dry. Drying times vary depending on substrate type, coat thickness, temperature, and humidity.

• What spray machine is needed for this product?
  Use any airless spray machine with a minimum flow rate of 5L/min. Recommended nozzles fall in the 3.31 to 6.35 range. Check the product packaging or technical datasheet for nozzle guidance specific to your equipment.

Summary

Toupret Airless Spray Jointing Plaster provides ready-to-use interior spray plaster for jointing and skimming of plasterboard. No mixing is needed, no priming of substrates is required, and the surface is ready to overcoat within 24 to 48 hours. UKCA and CE certified, each bag carries a 12-month guarantee when stored in its original packaging away from sunlight and frost.

"Always read the Toupret Airless Spray Jointing Plaster (40 x 25kg Bag Pallet) Technical Datasheet prior to first use to make sure that you have the correct information and product for your application."