Silverline Cranked SDS Plus Angled Tile Removal Chisel 40mm 793781

Silverline 40mm Wide Cranked SDS Plus Angled Tile Removal Chisel

Barcode: 5055058146199

MPN: 793781

Overview:

793781 40mm Wide Cranked SDS Plus Angled Tile Removal Chisel designed for fast tile lifting, scraping and light demolition when used in SDS Plus rotary hammers with a roto-stop function. The cranked, angled profile helps keep your hand position clear and improves leverage at the working face, making it ideal for removing ceramic tiles and breaking through adhesives and bedding layers. Manufactured from drop-forged steel and heat treated for strength, it’s suitable for use on masonry, stone, brick and concrete where controlled material removal is required. Finished with a dry rust-resistant coating and shot-blasted for durability, it’s a reliable SDS Plus chisel for renovation and strip-out work.

Key Features

• 40mm wide cranked, angled chisel for tile removal and scraping

• Designed for SDS Plus drills/rotary hammers with roto-stop function

• Ideal for lifting ceramic tiles and removing adhesive/bedding

• Suitable for light demolition and general breaking-up work

• Drop-forged steel construction for toughness

• Heat treated and hardened for long service life

• Dry rust-resistant coating for improved durability in storage

• Compatible with all SDS Plus chucks

Specifications

• Brand: Silverline

• Product Type: SDS Plus angled tile removal chisel

• MPN: 793781

• Chisel Width: 40mm

• Overall Length: 250mm

• Compatibility: SDS Plus chucks

• Shank Size: 17mm

• Shank Type: Hex

• Tip Material: Forged steel

• Construction: Drop forged

• Point Style: Chisel

• Hardened: Yes

• Finish: Shot blasted

• Coating: Dry rust-resistant

Applications

• Removing ceramic wall and floor tiles

• Stripping tile adhesive and bedding layers

• Cleaning and dressing brickwork and stone surfaces

• Light demolition and controlled breaking-up tasks

• Renovation strip-out work on masonry and concrete (task dependent)

How to Use

• Use with an SDS Plus rotary hammer that has a roto-stop (hammer-only) mode

• Insert the chisel fully into the SDS Plus chuck and lock in place

• Start at an exposed edge and work the blade under the tile or material

• Use steady pressure and let the tool do the work—avoid forcing

• Wear eye protection, gloves and suitable PPE during demolition

40mm Cranked SDS Plus Tile Removal Chisel – Key FAQs

• Do I need a roto-stop function to use this chisel?
  Yes, for tile removal and chiselling you should use a rotary hammer with a roto-stop/hammer-only mode so the bit doesn’t rotate during use.

• What does the cranked angled design help with?
  The crank improves working angle and leverage, helping lift tiles and scrape surfaces while keeping your hands clearer of the floor or wall.

• Is it only for tile removal?
  It’s primarily for tile lifting and scraping, but it can also be used for light demolition, cleaning brickwork, and dressing stone or masonry surfaces.

• Will it fit any SDS Plus drill?
  It’s compatible with SDS Plus chucks. Make sure your tool is an SDS Plus rotary hammer (not a standard drill) and has hammer-only mode.

• Can it remove tile adhesive as well as tiles?
  Yes, it’s effective for breaking through adhesive and bedding layers, especially when the chisel is kept flat to the surface for controlled scraping.

• How do I keep the chisel performing well?
  Keep the edge clean, avoid striking metal or hard fixings where possible, and don’t use excessive side leverage that can stress the chisel or tool.

Full Range of Breaker Chisel Bits