Silverline Masonry 25mm x 250mm Cold Chisel Hand Guard Bolster PC51

Silverline Masonry 25mm x 250mm Cold Chisel Hand Guard Bolster PC51

MPN: PC51

Size: 1 inch x 10 inch

Barcode: 5024763014659

Overview:

The Silverline Masonry Cold Chisel with Hand Guard 25mm x 250mm is a tough impact tool for shaping, chipping and splitting brick, stone and concrete. Ideal for demolition and general masonry work, it’s also useful for cutting channels to run electrical and plumbing services into walls and solid surfaces. Forged from a single piece of solid steel, it features a ground cutting edge that’s hardened and tempered for durability. The octagonal, powder-coated shaft helps resist bending under heavy blows, while the flexible one-piece hand guard helps protect your hand from impact and shock during use.

Key Features:

• 25mm (1") masonry cold chisel for chipping and shaping

• Ideal for brick, stone, masonry and concrete surfaces

• One-piece forged steel construction for strength

• Ground cutting edge, hardened and tempered for durability

• Octagonal shaft helps resist bending under impact

• Powder-coated shaft for improved corrosion resistance

• Flexible one-piece hand guard helps protect against удар/impact and shock

• Conforms to BS3066:1995

Specifications:

• Brand: Silverline

• Product Type: Masonry cold chisel / bolster with hand guard

• MPN: PC51

• EAN / Barcode: 5024763014659

• Blade Width: 25mm (1") approx.

• Overall Length: 250mm (10") approx.

• Octagonal Bar Size: 22mm

• Edge: Hardened and tempered

• Shaft Finish: Powder coated

• Guard Material: Soft plastic (non-bristle)

Typical Applications:

• Chipping and shaping brick and blockwork

• Splitting or trimming stone and masonry

• Breaking out small sections of concrete

• Cutting channels for electrical conduit and plumbing runs

• General demolition and renovation tasks in home and site environments

How to Use:

• Wear eye protection, gloves and suitable PPE before starting

• Mark the area to be cut or chipped

• Hold the chisel firmly behind the hand guard

• Strike the chisel head with a suitable hammer, using controlled blows

• Reposition as needed to follow the line or remove material evenly

• Check the cutting edge regularly and dress/replace if damaged

Silverline PC51 Cold Chisel 25mm x 250mm – Key FAQs:

• What is this cold chisel used for?

  • It’s used for shaping, chipping and splitting masonry materials such as brick, stone and concrete, including cutting channels for services during renovation work.

• Why does it have an octagonal shaft?

  • The octagonal shape adds strength points around the bar and helps reduce the chance of bending under heavy impact compared with some round shafts.

• What does the hand guard do?

  • The flexible hand guard helps protect your hand from impact and shock, and offers added safety if you miss a strike or work in tighter positions.

• Is it hardened?

  • Yes, the cutting edge is ground, hardened and tempered to improve durability and maintain performance during repeated use on hard masonry surfaces.

• What size is it?

  • It’s approximately 25mm (1") wide and 250mm (10") long, a practical size for both controlled cutting and general masonry chipping work.

• Does it meet a standard?

  • Yes, it conforms to BS3066:1995, making it a suitable choice for general-purpose masonry chisel applications.

Silverline Tools Guarantee:

Hand tools are guaranteed forever other tools are guaranteed for 3 years unless stated. This simply means all hand tools are guaranteed to be free of defects caused by faulty materials or workmanship from now until the end of time. Naturally, fair wear and tear is not covered so do not expect blades to stay sharp forever.

To Register your product. Click here Silverline Tools Guarantee this must be done to extend your Silverline Guarantee.