Marksman SDS Plus Breaker Chisel 4 Pc Set Pointed Flat and Gouging 58060C

Marksman SDS Plus Breaker Chisel 4 Piece Set Pointed Flat and Gouging

Barcode: 5038673580609

MPN: 58060C

Overview:

The Marksman SDS PLUS Breaker Chisel 4 Piece Set (58060C) is a versatile set of chisels for demolition, renovation and general breaking-out work in tough materials. Designed to fit SDS Plus rotary hammers, the set includes narrow and wide flat chisels, a pointed chisel for concentrated impact, and a gouging chisel for chasing and shaping. Each chisel features a convex tip angle for improved penetration, reduced binding and easier re-sharpening, helping you work more efficiently in concrete, masonry and block. Ideal for lifting tiles, removing mortar, breaking out sections and cutting channels where a reliable SDS+ chisel set is essential.

Key Features

• 4 piece SDS Plus breaker chisel set for demolition and renovation

• Includes pointed, flat and gouging chisels for multiple tasks

• Convex tip angle helps improve penetration and reduce binding

• Easier re-sharpening for longer service life

• Fits most SDS Plus rotary hammers and breakers

• Suitable for concrete, masonry, brick and blockwork

• Ideal for breaking out, chasing and surface removal work

Specifications

• Brand: Marksman

• MPN: 58060C

• Barcode: 5038673580609

• Shank Type: SDS Plus

• Set Size: 4 pieces

• Chisel Types Included: Pointed, flat (20mm), flat (40mm), gouging

• Flat Tip Widths: 20mm and 40mm

• Suitable Materials: Concrete, masonry, brick, block

Applications

• Breaking out concrete and blockwork during demolition

• Removing tiles, render and old mortar during renovation

• Chasing channels for cables and pipework (gouging use)

• General masonry cutting and surface preparation

• Cleaning joints and lifting stubborn materials

How to Use

• Fit the chisel into an SDS Plus rotary hammer/breaker

• Chiselling Mode when using chisels, switch the drill to chisel or hammer-only mode.

• Use the pointed chisel for concentrated breaking and starting holes

• Use flat chisels (20mm/40mm) for lifting, trimming and surface removal

• Use the gouge chisel for chasing and shaping channels

• Let the tool do the work avoid excessive side pressure to reduce binding

• Inspect tips regularly and re-sharpen when needed

Marksman SDS Plus Breaker Chisel 4 Piece Set – Key FAQs

• What’s included in the Marksman 58060C set?
  It includes four SDS Plus chisels: a pointed chisel, two flat chisels (20mm and 40mm), and a gouging chisel for chasing and shaping work.

• Will these chisels fit my SDS Plus drill?
  Yes, they’re designed for SDS Plus rotary hammers and breakers. Make sure your tool accepts SDS Plus bits (not SDS Max).

• What is the convex tip angle for?
  A convex tip angle helps improve penetration, reduces binding in the cut, and makes the chisel easier to re-sharpen for extended use.

• What materials can I use them on?
  They’re ideal for concrete, masonry, brick and blockwork, and for renovation tasks like removing mortar, render and tiles.

• Which chisel should I use first?
  Use the pointed chisel to start break-out work or concentrate force in a small area, then switch to a flat or gouge chisel for removal and shaping.

• What’s the difference between the 20mm and 40mm flat chisels?
  The 20mm flat chisel offers more control in tighter areas, while the 40mm flat chisel covers more surface for faster material removal.

• Can the chisels be re-sharpened?
  Yes. The tip design supports re-sharpening as they wear, helping maintain performance over time.

• Do I need to use hammer-only mode?
  For chiselling and breaking, hammer-only mode is typically recommended if your tool has it. (can not be used on rotary)