Blue Spot Tools Ironmongery 400mm Zinc Plated Tee Hinge 78038

Blue Spot Tools Ironmongery 400mm Zinc Plated Tee Hinge

MPN: 78038

Barcode: 5028734780383

Size: 400mm

Weight: 0.75kg

Overview:

This 400mm tee hinge from Blue Spot Tools is made from carbon steel with a zinc plated finish. The zinc coating acts as a barrier against corrosion, making it well suited to permanent outdoor installations. It comes with all the necessary fittings included.

Designed for use on wooden gates, shed doors, and fences, this surface-mounted hinge offers a straightforward fit on most standard timber applications. A 5 year guarantee backs this hinge for added peace of mind.

Key Features and Benefits

• Carbon Steel Construction: Provides the structural strength needed for outdoor gate and door applications.
• Zinc Plated Finish: Forms a protective layer that resists corrosion when exposed to the elements.
• Fittings Included: Comes with all necessary fixings, so no separate hardware purchase is needed.
• 5 Year Guarantee: Backed by Blue Spot Tools' 5 year manufacturer's guarantee.

Specs & Attributes

• Size: 400mm
• Weight: 0.75kg
• Material: Carbon steel
• Finish: Zinc plated
• Use: External

Typical Applications

• Wooden garden gates
• Fence gate panels
• Shed doors
• Outbuilding doors
• Garden structure access points
• Lightweight timber framed gates

How to Use

• Mark the Position: Hold the hinge in place on the gate and post, then mark the screw hole positions with a pencil.

• Drill Pilot Holes: Drill pilot holes at each marked point to prevent the timber from splitting during fixing.

• Fix the Frame Plate: Attach the rectangular plate section to the gate post or frame first, checking it sits flush.

• Attach the Strap: Align the tapered strap along the gate and fix with the included screws. Do not fully tighten yet.

• Check Alignment: Open and close the gate to confirm free movement and correct alignment, then fully tighten all fixings.

Frequently Asked Questions (FAQs)

• What size tee hinge do I need for my gate?
  As a general rule, a tee hinge should be at least half the width of the gate. For a gate 800mm wide, a 400mm hinge is appropriate. For heavier or wider gates, opt for a heavier gauge hinge rather than relying on size alone.

• How many tee hinges do I need for a gate?
  Two tee hinges are sufficient for most standard garden gates. For taller or heavier doors, a third hinge positioned centrally helps prevent sagging over time.

• What is the difference between a tee hinge and a hook and band hinge?
  A tee hinge is a surface-mounted hinge suited to lighter timber gates and shed doors. Hook and band hinges are heavier-duty, designed for larger or heavier gates where greater load-bearing capacity is needed.

• Are tee hinges suitable for outdoor use?
  Yes, provided they have a corrosion-resistant coating. A zinc plated finish protects the steel against rust and weather exposure, making the hinge suitable for permanent outdoor installation.

• Can tee hinges be used on both left and right-hand gates?
  Yes. Tee hinges are not handed, so the same hinge works for both left-hand and right-hand gate openings without modification.

Summary

The Blue Spot Tools 400mm zinc plated tee hinge is a carbon steel surface-mounted hinge built for permanent outdoor use on wooden gates, shed doors, and fences. The zinc plated finish resists corrosion, all fixing hardware is included, and the hinge carries a 5 year guarantee.