Blue Spot Tools Ironmongery 204mm Zinc Plated Tee Hinge 78035

Blue Spot Tools Ironmongery 204mm Zinc Plated Tee Hinge

MPN: 78035

Barcode: 5028734780352

Size: 204mm

Weight: 0.25kg

Overview:

The Blue Spot Tools 204mm zinc plated tee hinge is built from carbon steel with a zinc plated coating to resist corrosion. It suits permanent outdoor fixing on wooden gates, fences, and shed doors.

The carbon steel body handles the regular strain of outdoor use without flexing or weakening over time. All necessary fittings are included, so installation can begin straight away. Backed by a Blue Spot Tools 5 year guarantee, this hinge is a practical choice for garden and outbuilding projects.

Key Features and Benefits

• Carbon Steel Body: The carbon steel construction gives the hinge the strength to hold up under regular outdoor use on gates and shed doors.
• Zinc Plated Coating: The zinc finish shields the hinge from rust and corrosion, keeping it protected when exposed to the elements.
• Ready to Install: Supplied with all the fittings needed, so no separate trip to the hardware shop is required.
• Outdoor Use: Designed for permanent external fitting on wooden gates, garden fences, and shed doors.
• 5 Year Guarantee: Covered by a Blue Spot Tools 5 year guarantee for added confidence in the product.

Specs & Attributes

• Size: 204mm
• Weight: 0.25kg
• Material: Carbon steel
• Finish: Zinc plated
• Use: External

Typical Applications

• Wooden garden gate hanging
• Fence gate mounting
• Shed door fitting
• Outbuilding and workshop doors
• Cabin or summer house doors
• Timber storage box lids

How to Use

• Mark Up: Hold the hinge against the gate and post, then mark all fixing hole positions clearly in pencil.

• Drill Pilot Holes: Drill pilot holes at each marked point to prevent the timber from splitting when fixing.

• Attach the Strap: Fix the long strap arm flat against the face of the gate or door using the supplied fittings.

• Fix the Plate: Secure the mounting plate to the post or frame, keeping it aligned with the strap arm.

• Check and Adjust: Open and close the gate to confirm the hinge sits correctly, and adjust the fixing position if needed.

Frequently Asked Questions (FAQs)

• What size tee hinge do I need for my gate?
  As a general guide, the hinge length should cover at least half the width of the gate. A 200mm tee hinge works well on narrower gates up to around 400mm wide. Wider or heavier gates may call for a larger size.

• How many tee hinges does a gate need?
  Most standard domestic gates use two tee hinges. For gates taller than approximately 2100mm, a third hinge fitted midway down the gate adds extra support and helps prevent warping over time.

• What is the difference between a tee hinge and a band and gudgeon hinge?
  A tee hinge mounts flat on the face of the gate and post, making it quick to fit and well suited to lighter domestic use. A band and gudgeon hinge pins onto a fixed bolt in the post and is better suited to heavier or larger gates.

• Can a tee hinge be used on both left-hand and right-hand gates?
  Yes. Tee hinges are non-handed, meaning they can be fitted on gates that open either to the left or the right without any modification.

• Do tee hinges need any maintenance?
  Applying a light lubricant to the hinge pin periodically helps the gate swing smoothly and slows wear on the moving parts. For zinc plated hinges used outdoors, checking for any surface rust and treating it early will extend the working life of the hinge.

Summary

The Blue Spot Tools 204mm zinc plated tee hinge offers a carbon steel build with a protective zinc coating, making it a straightforward and dependable choice for outdoor woodwork projects. Supplied complete with all necessary fittings and backed by a 5 year guarantee, it covers a range of applications from garden gates and fences to shed and outbuilding doors.