Blue Spot Tools Ironmongery 300mm Zinc Plated Tee Hinge 78037

Blue Spot Tools Ironmongery 300mm Zinc Plated Tee Hinge

MPN: 78037

Barcode: 5028734780376

Size: 300mm

Weight: 0.41kg

Overview:

This 300mm tee hinge from Blue Spot Tools is made from carbon steel with a zinc plated finish. The coating shields the metal against rust and corrosion, making it well suited for permanent outdoor use.

The T-shaped design pairs a fixed knuckle plate with a tapered strap arm. This spreads the load across a wider area of the door or gate, reducing strain on the fixing points. All necessary fittings are included, and the hinge is backed by a 5 year guarantee from Blue Spot Tools.

Key Features and Benefits

• Carbon Steel Construction: Provides the strength needed for permanent outdoor gate and door installations.
• Zinc Plated Finish: Protects against rust and corrosion when exposed to outdoor conditions.
• T-Shaped Profile: The extended strap arm distributes door weight across a wider fixing area, reducing stress on the frame.
• Fittings Included: Comes with all necessary fixings, so no additional hardware is required to complete the installation.
• 5 Year Guarantee: Backed by Blue Spot Tools' 5 year manufacturer guarantee.

Specs & Attributes

• Size: 300mm
• Weight: 0.41kg
• Material: Carbon steel
• Finish: Zinc plated
• Use: External

Typical Applications

• Wooden garden gates
• Timber shed doors
• Fence panels with gate frames
• Outbuilding and workshop doors
• Lightweight external timber doors
• Ledge and brace door installations

How to Use

• Position the hinge: Hold the hinge against the gate post and door, aligning the knuckle with the swing point. Mark the screw hole positions with a pencil.

• Drill pilot holes: Use a drill bit slightly smaller than the fixing screws to create pilot holes at each marked point. This reduces the risk of splitting the timber.

• Fix the knuckle plate: Attach the short rectangular plate to the gate post first, using the fixings provided.

• Fix the strap arm: Secure the tapered strap to the face of the gate or door, working from the knuckle end outwards.

• Check the swing: Open and close the gate or door to confirm the hinge moves freely. Tighten any loose fixings before leaving the installation.

Frequently Asked Questions (FAQs)

• What is a tee hinge used for?
  A tee hinge is a surface-mounted hinge used on ledge and brace doors, gates, and shed doors. The T-shape combines a short knuckle plate fixed to the post with a longer strap arm fixed to the door face, distributing the door's weight along the frame.

• What size tee hinge do I need?
  As a general rule, the hinge arm should cover at least half the width of the door or gate being hung. A 300mm tee hinge is typically suited to gates or shed doors up to around 600mm wide.

• What is the difference between a tee hinge and a strap hinge?
  A tee hinge has one short rectangular plate and one long strap arm, fixing to a post and door respectively. A strap hinge has two tapered arms of similar length and is more commonly used to connect one gate leaf to another in bi-folding gate configurations.

• How many tee hinges do I need for a gate?
  Two hinges are sufficient for most gates up to around 2100mm tall. For taller or heavier gates, a third hinge positioned mid-rail helps carry the additional load and prevents the gate from sagging over time.

• Can tee hinges be used outdoors?
  Yes - provided the hinge has a corrosion-resistant finish. Zinc plated steel is a common choice for outdoor use as the coating acts as a barrier against moisture and rust.

Summary

The Blue Spot Tools 300mm Zinc Plated Tee Hinge is a carbon steel gate and door hinge built for permanent outdoor installations. The zinc plated finish guards against corrosion, all fittings are included, and the product is covered by a 5 year Blue Spot Tools guarantee.