Blue Spot Tools Ironmongery 300mm Black Powder Coated Tee Hinge 78030

Blue Spot Tools Ironmongery 300mm Black Powder Coated Tee Hinge

MPN: 78030

Barcode: 5028734780307

Size: 300mm

Weight: 0.41kg

Colour: Black

Overview:

This Blue Spot Tools 300mm tee hinge is manufactured from carbon steel. A black powder coated finish protects the metal against corrosion. Both make it a practical choice for permanent outdoor fittings.

It suits wooden gates, fences, and shed doors. All necessary fixings come supplied, and the hinge carries a 5-year manufacturer's guarantee.

Key Features and Benefits

• Carbon Steel Construction: Carbon steel provides greater strength than lighter metal alternatives, making it better suited to structural outdoor fittings.
• Powder Coat Corrosion Protection: The black powder coated finish protects the metal against corrosion in outdoor conditions.
• Permanent Outdoor Use: Designed for fixed outdoor installations on gates, fences, and shed doors.
• All Fixings Supplied: All necessary fixings come included, so installation can begin without sourcing additional hardware.
• 5-Year Guarantee: Blue Spot Tools manufacturer-supported cover from the date of purchase.

Specs & Attributes

• Size: 300mm
• Weight: 0.41kg
• Material: Carbon steel
• Finish: Black powder coat
• Colour: Black
• Use: External

Typical Applications

• Wooden garden gates
• Shed doors
• Garden fence panels
• Outbuilding doors
• Workshop doors
• Log store doors

How to Use

• Mark the Hinge Positions: Hold the hinge against the door and mark each fixing hole with a pencil.

• Drill Pilot Holes: Drill small pilot holes at each marked point to prevent the wood from splitting.

• Fix the Hinge to the Door: Align the long strap section along the door face and screw it in place.

• Position the Door: Offer the door into the opening and hold it at the correct height using wedges or packers.

• Fix to the Post or Frame: Secure the short plate section to the gate post or door frame using the supplied fixings.

• Test the Swing: Open and close the door to check alignment before finishing.

Frequently Asked Questions (FAQs)

• How do I choose the right size tee hinge for a gate or shed door?
  A common guide is to use a hinge length roughly half the width of the door. For heavier or taller doors, a longer hinge distributes weight more effectively. This reduces the risk of the door dropping over time.

• How many tee hinges do I need per door?
  Two tee hinges suit most standard garden gates and shed doors. Taller or heavier doors benefit from a third hinge fitted midway between the two outer ones. This adds support and helps prevent the door from twisting under its own weight.

• What is the difference between a tee hinge and a band and hook hinge?
  A tee hinge is a surface-mounted, one-piece fitting fixed directly to both the door and the frame. A band and hook hinge uses a separate hook plate on the post and a strap on the door. The door then hangs from the hook, which allows it to lift off completely. Band and hook hinges are generally used for larger, heavier gates.

• Can tee hinges be fitted to pressure-treated timber?
  Yes, but it is worth checking the fixings being used. Some timber treatments contain chemicals that can accelerate corrosion in standard steel screws. Using stainless steel or hot-dip galvanised fixings on pressure-treated wood reduces this risk.

• Why does a gate sag on tee hinges over time?
  Sagging usually occurs when the hinges are undersized for the door's weight. It can also happen when screws loosen in the timber over time. Matching hinge size to door width and re-tightening screws periodically helps maintain correct alignment.

Summary

This 300mm powder coated tee hinge from Blue Spot Tools is manufactured from carbon steel for outdoor use. It suits wooden gates, fences, and shed doors, comes with all necessary fixings, and is backed by a 5-year manufacturer's guarantee.