Blue Spot Tools Ironmongery 250mm Zinc Plated Tee Hinge 78036

Blue Spot Tools Ironmongery 250mm Zinc Plated Tee Hinge 78036

MPN: 78036

Barcode: 5028734780369

Size: 250mm

Weight: 0.29kg

Overview:

This 250mm tee hinge from Blue Spot Tools is manufactured from carbon steel with a zinc plated finish. The zinc plating acts as a protective barrier, making it suited to permanent outdoor installations on wooden gates, fences, and shed doors. All necessary fittings are included in the box.

The hinge comes backed by a 5 year Blue Spot Tools guarantee, offering confidence for long-term outdoor use.

Key Features and Benefits

• Carbon Steel Construction: Made from carbon steel, providing the structural strength needed for gate and door applications.
• Corrosion-Resistant Coating: The zinc plated finish shields the metal from rust in wet or damp outdoor conditions.
• Fittings Included: All necessary fittings come supplied, so no additional hardware is required for installation.
• Permanent Outdoor Installation: Designed for long-term outdoor use on wooden gates, fences, and shed doors.
• 5 Year Guarantee: Backed by a 5 year Blue Spot Tools manufacturer guarantee.

Specs & Attributes

• Material: Carbon steel
• Finish: Zinc plated
• Size: 250mm
• Weight: 0.29kg
• Use: External

Typical Applications

• Wooden garden gates
• Timber fence panels
• Shed doors
• Workshop doors
• Garage side doors
• Outbuilding access doors

How to Use

• Mark the Position: Hold the hinge against the gate and post to mark each fixing point accurately.

• Pre-Drill Pilot Holes: Drill pilot holes at each marked point to prevent the timber from splitting.

• Fix the Strap: Attach the longer strap arm to the face of the gate using the supplied fittings.

• Attach the Knuckle Plate: Fix the rectangular plate to the gate post, aligning it with the strap.

• Check Operation: Open and close the gate to confirm the hinge moves freely and sits flush against both surfaces.

Frequently Asked Questions (FAQs)

• What size tee hinge do I need for my gate?
  As a general rule, the hinge length should be at least half the width of the gate. A 500mm wide gate, for example, would require a 250mm tee hinge.

• How many tee hinges do I need per gate?
  Two hinges per gate is standard for gates up to around 1500mm high. For gates taller than 2100mm, a third hinge should be added to support the extra weight.

• What is the difference between a tee hinge and a band and hook hinge?
  A tee hinge surface-mounts directly to both the gate and the post in one piece. A band and hook hinge uses a separate pin fixed to the post, onto which the band drops - often preferred for heavier gates.

• Can tee hinges be used on treated timber?
  Yes. Tee hinges mount directly to the surface of the timber using screws, making them compatible with both treated and untreated timber gates and doors.

• Are zinc plated hinges suitable for outdoor use?
  Yes. The zinc plating forms a protective layer over the steel, helping to resist rust and corrosion when exposed to outdoor conditions.

Summary

The Blue Spot Tools 250mm zinc plated tee hinge offers a carbon steel build with a corrosion-resistant finish for permanent outdoor use. It suits wooden gates, fences, and shed doors, and comes complete with all necessary fittings. Backed by a 5 year Blue Spot Tools guarantee.