Blue Spot Tools Ironmongery 250mm Black Powder Coated Tee Hinge 78029

Blue Spot Tools Ironmongery 250mm Black Powder Coated Tee Hinge

MPN: 78029

Barcode: 5028734780291

Size: 250mm

Weight: 0.29kg

Colour: Black

Overview:

Built from carbon steel with a black powder coated finish, this Blue Spot Tools Ironmongery 250mm tee hinge resists corrosion in outdoor conditions. The black powder coat shields the carbon steel from rust and the elements.

The hinge suits permanent outdoor installations on wooden gates, garden fences, and shed doors. All necessary fixings are included in the pack, so there is no need to source additional hardware.

Key Features and Benefits

• Carbon Steel Construction: Provides the strength needed to support wooden garden gates and fence panels.
• Black Powder Coated Finish: Protects the metal against rust and corrosion, making it suited to permanent outdoor use.
• Fixings Included: Everything required for installation is in the pack - no separate hardware purchase needed.
• 5-Year Guarantee: Backed by Blue Spot Tools, giving manufacturer-supported cover from the date of purchase.

Specs & Attributes

• Size: 250mm
• Weight: 0.29kg
• Material: Carbon steel
• Finish: Black powder coat
• Colour: Black
• Use: Outdoor/external

Typical Applications

• Wooden garden gates
• Timber fence panels
• Shed doors
• Garden outbuilding doors
• Workshop entrance doors
• Timber gate frames

How to Use

• Mark Fixing Positions: Hold the hinge against the gate leaf and post. Mark each fixing hole position with a pencil.

• Pre-Drill Pilot Holes: Drill pilot holes at the marked positions to prevent the timber from splitting.

• Attach the Strap Leaf: Align the longer strap section along the face of the gate. Screw firmly into place using the supplied fixings.

• Attach the Knuckle Leaf: Fix the shorter rectangular leaf to the gate post. Check the hinge knuckle aligns centrally before tightening.

• Test and Adjust: Open and close the gate to check for smooth operation. Tighten all fixings fully once satisfied with alignment.

Frequently Asked Questions (FAQs)

• What size tee hinge do I need for a garden gate?
  The hinge strap should reach at least half the width of the gate. For a 1000mm wide gate, a 500mm hinge is the recommended minimum.

• How many tee hinges does a gate need?
  Most standard garden gates need two hinges. Gates taller than 2100mm need a third hinge to carry the additional weight.

• What is the difference between a tee hinge and a strap hinge?
  A tee hinge combines a short rectangular leaf for the post with a longer strap for the gate, forming a T-shape. A strap hinge uses two long tapered leaves and offers greater support for heavier gates.

• Can tee hinges be fitted on both left-hand and right-hand gates?
  Yes. Standard tee hinges are non-handed, so they fit both left- and right-hand hung gates without modification.

• Do outdoor tee hinges need maintenance?
  Periodic lubrication keeps the pivot point moving freely. Checking that fixing screws remain tight after the first season is also advisable.

Summary

The Blue Spot Tools 250mm black powder coated tee hinge is a carbon steel fitting built for permanent outdoor use on wooden gates, fences, and shed doors. It arrives with all necessary fixings and carries a 5-year guarantee from Blue Spot Tools.