Blue Spot Tools Ironmongery 152mm Black Powder Coated Tee Hinge 78027

Blue Spot Tools Ironmongery 152mm Black Powder Coated Tee Hinge 78027

MPN: 78027

Barcode: 5028734780277

Size: 152mm

Weight: 0.12kg

Colour: Black

Overview:

Carbon steel forms the body of this 152mm tee hinge from Blue Spot Tools. A black powder coat finish actively protects the metal against rust and corrosion. The hinge suits permanent outdoor use on wooden gates, shed doors, and fence panels.

The pack includes every fixing needed for immediate mounting and the product is backed by a 5-year guarantee from Blue Spot Tools for added peace of mind.

Key Features and Benefits

• Carbon Steel Body: Carbon steel construction gives this hinge a solid base for outdoor gate and door use.
• Powder Coat Protection: The black powder coat finish shields the steel against rust and corrosion.
• All Fixings Included: Every fixing required for installation comes in the pack - no additional hardware needed.
• Permanent Outdoor Build: The design targets permanent outdoor installation on timber.
• 5-Year Guarantee: Backed by Blue Spot Tools' manufacturer's guarantee

Specs & Attributes

• Material: Carbon steel
• Finish: Black powder coat
• Size: 152mm
• Weight: 0.12kg
• Use: Outdoor / External

Typical Applications

• Garden gate hanging
• Shed door installation
• Fence panel gate fitting
• Outbuilding door hanging
• Summerhouse doors
• Field gate installation

How to Use

• Mark Positions: Hold the hinge against the gate leaf and post, then mark all screw hole positions with a pencil.

• Pre-Drill: Use a drill bit slightly narrower than the screws to pre-drill at each marked point.

• Fix the Strap: Attach the strap section to the face of the gate leaf with the included fixings.

• Fix the Knuckle: Align the knuckle plate with the post or frame, then screw it firmly in place.

• Check the Swing: Open and close the gate to verify alignment. Adjust the fixing positions if the gate binds or sits unevenly.

Frequently Asked Questions (FAQs)

• What is the difference between a tee hinge and a butt hinge?
  A tee hinge has a long strap that mounts to the face of a door or gate. It pairs with a shorter knuckle plate that fixes to the post or frame. A butt hinge fits into recesses on the door edge and frame, keeping the hardware out of sight. Tee hinges work best on ledge-and-brace gates and shed doors where surface mounting is the only option.

• How do I choose the right size tee hinge for my gate?
  A widely used guide is that the strap should cover at least half the width of the gate. Two-thirds coverage is recommended for heavier or taller gates. Always check the hinge's load capacity against the gate's weight before buying.

• How many tee hinges does a gate or shed door need?
  Two hinges - one near the top and one near the bottom - suit most lightweight garden gates and shed doors. Adding a third hinge in the middle supports heavier or taller gates and reduces the risk of sagging over time.

• Can tee hinges be fitted on both left-hand and right-hand gates?
  Yes. Tee hinges are surface-mounted with a symmetrical pivot. The same hinge works on gates or doors that open in either direction.

• How do I maintain outdoor metal hinges to prevent rust?
  Apply a light coat of oil or general-purpose lubricant to the pivot point at least once a year. After the first few months, check that all fixings remain tight, as timber moves with seasonal changes in moisture.

Summary

The Blue Spot Tools 152mm tee hinge is a carbon steel outdoor hinge with a black powder coat finish. It mounts permanently to wooden gates, shed doors, and fence panels, and includes all fixing hardware. Blue Spot Tools backs the hinge with a 5-year guarantee.