Blue Spot Tools Ironmongery 102mm Zinc Plated Tee Hinge 78033

Blue Spot Tools Ironmongery 102mm Zinc Plated Tee Hinge

MPN: 78033

Barcode: 5028734780338

Size: 102mm

Weight: 0.15kg

Overview:

This 102mm tee hinge from Blue Spot Tools is made from carbon steel with a zinc plated finish. The zinc coating acts as a barrier against rust and corrosion, making it well suited to outdoor use. It ships with all necessary fixings, so you can get straight to work without sourcing additional hardware.

The T-shaped profile allows one leaf to mount flat against the post and the strap to run across the face of the door or gate. This design spreads the load across a wider surface area, helping the hinge hold its position over time. It works on wooden gates, shed doors, fence panels, and similar lightweight outdoor structures.

Key Features and Benefits

• Carbon Steel Construction: Provides the strength needed for outdoor gate and shed door applications.
• Zinc Plated Finish: Resists rust and corrosion when exposed to the elements.
• T-Shaped Profile: The flat knuckle leaf mounts to the post, while the tapered strap runs across the door face for load distribution.
• Complete Fixings Included: All necessary mounting hardware is supplied in the pack.
• 5 Year Guarantee: Backed by Blue Spot Tools' 5 year manufacturer guarantee.

Specs & Attributes

• Size: 102mm
• Weight: 0.15kg
• Material: Carbon Steel
• Finish: Zinc Plated
• Use: External

Typical Applications

• Wooden garden gates
• Shed doors
• Fence panels and access gates
• Workshop and outbuilding doors
• Lightweight timber gates
• Garden storage unit doors

How to Use

• Mark the Position: Hold the hinge in place on the post and gate. Mark the centre of each fixing hole with a pencil or bradawl.

• Drill Pilot Holes: Use a drill bit slightly smaller than your fixing screws. Drill pilot holes at each marked point to prevent the wood from splitting.

• Fix the Knuckle Leaf to the Post: Align the rectangular leaf with the post and drive the screws home. Check that it sits flat against the surface.

• Attach the Strap to the Door or Gate: Position the tapered strap along the face of the door. Secure it with the remaining fixings, working from the hinge pin outward.

• Test the Swing: Open and close the gate or door to check for smooth movement. Tighten any loose fixings if needed.

Frequently Asked Questions (FAQs)

• What size tee hinge do I need for my gate?
  As a general guide, the hinge strap should cover at least half the width of the gate. For a 200mm wide gate, a 100mm tee hinge is the minimum. This 102mm hinge suits narrower gates and smaller shed doors.

• How many tee hinges does a gate need?
  Most standard gates need two hinges - one near the top and one near the bottom. Taller or heavier gates may benefit from a third hinge fitted in the middle for added support.

• What is the difference between a tee hinge and a hook and band hinge?
  A tee hinge has a fixed leaf that screws flat onto the post and a strap that screws onto the face of the door. A hook and band hinge uses a hook bolted to the post and a band that wraps around the gate. Hook and band hinges generally handle heavier gates.

• Can tee hinges be used outdoors?
  Yes. Zinc plated tee hinges are made for outdoor use. The zinc coating forms a protective layer that slows corrosion when the hinge is exposed to rain and moisture.

• Are tee hinges suitable for heavy gates?
  Tee hinges work well on lightweight to medium-weight gates and shed doors. For heavy gates - such as large driveway or field gate panels - hook and band hinges are typically the better choice as they carry more load.

Summary

The Blue Spot Tools 102mm zinc plated tee hinge is a straightforward, no-fuss solution for hanging wooden gates, shed doors, and fence panels outdoors. Made from carbon steel with a zinc plated finish, it resists corrosion and comes complete with all mounting fittings. Backed by a 5 year guarantee.